Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information:
Remove soiled or soaked clothing immediately.
In any case show the physician the Safety Data Sheet.

After inhalation:
When inhaled remove to fresh air and seek medical aid.

After contact with skin:
In case of contact with skin wash off immediately with soap and water.

After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.

After ingestion:
Summon a doctor immediately.

Fire-fighting measures

Suitable extinguishing media:
water spray jet
alcohol-resistant foam
dry powder
carbon dioxide

Extinguishing media that must not be used for safety reasons:
Full water jet

Special hazards arising from the substance or mixture:
In the event of fire the following can be released:
Carbon monoxide (CO)
Carbon dioxide (CO2)
Nitrous gases (NOx)
Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters:
Special protective equipment for firefighting
Use self-contained breathing apparatus.

Further information:
Wear protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear suitable personal protective equipment.
Ensure adequate ventilation.

Environmental precautions:
Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up:
Pick up mechanically. Rinse away rest with water.
Dispose of as prescribed

Handling and storage

Precautions for safe handling:
Open and handle container with care.

Hygiene measures:
Observe the usual precautions when handling chemicals.
Do not eat or drink during work time.
Keep away from foodstuffs and beverages.
Wash hands before breaks and after work.
Remove soiled or soaked clothing immediately.

Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection.

Conditions for safe storage, including any incompatibilities:
Further information on storage conditions:
Keep container tightly closed in a cool, well-ventilated place.
Sensitive to cold. In case of the product exhibits solidification, gelling or precipitation when its temperature goes down below 25 °C allow to thaw slowly at 35 - 40 °C. Stir briefly before use.

Transport information

Land transport (ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not restricted
Remarksopen allclose all

Additional transport information

Additional transport information
not restricted

Exposure controls / personal protection

General protective measures:
Avoid contact with eyes and skin.

Hand protection:
For long-term exposure:
Butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection :
safety glasses

Body protection :
working clothes

Stability and reactivity

Reactivity:
See section "Possibility of hazardous reactions"

Chemical stability:
Under normal conditions the product is stable.

Possibility of hazardous reactions:
No hazardous reactions when stored and handled according to prescribed instructions.

Conditions to avoid:
None known.

Incompatible materials:
Strong acids
Strong bases
Oxidizing agents

Hazardous decomposition products:
When handled and stored appropriately, no dangerous decomposition products are known.

Disposal considerations

Waste treatment methods:
Product:
Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities.

Uncleaned packaging:
Packaging that cannot be cleaned should be disposed of as product waste.