Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General information

Remove/Take off immediately all contaminated clothing.

After inhalation

Move the victim to fresh air.

After contact with skin

In case of contact, immediately flush skin with soap and plenty of water.

After contact with eyes

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

After ingestion

Get medical attention immediately.

Most important symptoms and effects, both acute and delayed


No symptoms known currently.


No hazards known at this time.

Indication of any immediate medical attention and special treatment needed


Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media

Carbon dioxide (CO2)

Water spray jet

Dry powder

Alcohol-resistant foam

Extinguishing media that must not be used for safety reasons

High volume water jet

Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

Carbon dioxide (CO2)

Advice for firefighters

Special protective equipment for firefighting

Self-contained breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Ensure adequate ventilation.

Wear suitable protective clothing.

Keep away sources of ignition.

Environmental precautions

Do not allow to enter drains or waterways

Methods and material for containment and cleaning up

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Handling and storage

Precautions for safe handling

Advice on safe handling

Use only in well-ventilated areas.

Hygiene measures

Wash hands before breaks and at the end of workday.

Use protective skin cream before handling the product.

Take off immediately all contaminated clothing and wash it before reuse.

Advice on protection against fire and explosion

Take measures to prevent the build up of electrostatic charge.

Keep away from sources of ignition - No smoking.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions

Keep container tightly closed.

Specific end use(s)

No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
ADR not restricted
ADN not restricted
RID not restricted
IATA not restricted
IMDG not restricted

Exposure controls / personal protection

Control parameters

Exposure limit values

Exposure limit values are not available.

Exposure controls

General protective measures

Avoid contact with skin.

Avoid contact with eyes.

Do not inhale vapours

Hand protection : Long-term exposure

Impervious butyl rubber gloves

Minimum breakthrough time / gloves : 480 min

Minimum thickness / gloves 0,7 mm

For short-term exposure (splash protection):

Nitrile rubber gloves.

Minimum breakthrough time / gloves : 30 min

Minimum thickness / gloves 0,4 mm

These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection : Safety glasses

Stability and reactivity

Chemical stability

Stable under normal conditions.

Possibility of hazardous reactions

No dangerous reaction known under conditions of normal use.

Conditions to avoid

Keep away from heat.

Keep away from flames and sparks.

Incompatible materials

not known

Hazardous decomposition products

When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

Waste treatment methods


In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste