Registration Dossier

Administrative data

First-aid measures

1. General information
Get medical advice/ attention if you feel unwell.
Remove/Take off immediately all contaminated clothing.
Treat symptomatically.

2. After inhalation
Immediately remove to fresh air. Consult a physician if irritating symptoms develop and persist.

3. After contact with skin
In case of contact, immediately flush skin with soap and plenty of water.
If skin irritation persists, call a physician.

4. After contact with eyes
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Consult a physician.

5. After ingestion
Rinse mouth with water.
Do NOT induce vomiting.
In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

6. Most important symptoms and effects, both acute and delayed
Symptoms:
No symptoms known currently

7. Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.

Fire-fighting measures

1. Extinguishing media

Suitable extinguishing media
Water mist
water
Dry powder
Carbon dioxide (CO2)

2. Special hazards arising from the substance or mixture
In case of fire hazardous decomposition products may be produced such as:
Carbon oxides
Emits toxic and corrosive fumes under fire conditions.

3. Advice for firefighters

Special protective equipment for firefighting
Self-contained breathing apparatus

Further information
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures

Wear suitable protective equipment.
Ensure adequate ventilation.

2. Environmental precautions

The product should not be allowed to enter drains, water courses or the soil.

3. Methods and material for containment and cleaning up

Pick up mechanically. Rinse away rest with water.
Avoid dust formation.
Take measures to prevent the build up of electrostatic charge.
Risk of dust explosion.
Treat recovered material as described in the section "Disposal considerations".

Handling and storage

1. Precautions for safe handling

Advice on safe handling
No special measures necessary if stored and handled as prescribed.
Keep container tightly closed.
Avoid formation of aerosol.
Provide adequate ventilation.

2. Hygiene measures
Wash hands before breaks and at the end of workday.
Use protective skin cream before handling the product.
Take off immediately all contaminated clothing and wash it before reuse.

3. Advice on protection against fire and explosion
Keep away sources of ignition.
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Dust can form an explosive mixture in air.

4. Conditions for safe storage, including any incompatibilities

Further information on storage conditions
Keep container closed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not restricted
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not restricted
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Control parameters
Exposure limit values
Exposure limit values are not available.
DNEL/DMEL values
DNEL/DMEL values are not available.
PNEC values
PNEC values are not available.

2. Appropriate engineering controls
Local ventilation recommended - mechanical ventilation may be used.

3. General protective measures
Observe the usual precautions for handling chemicals.
Do not breathe dust.

4. Respiratory protection : In case of inadequate ventilation wear respiratory protection.

5. Hand protection :
Impervious butyl rubber gloves, Neoprene gloves, PVC disposable gloves
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

6. Eye protection : Safety goggles

7. Body protection : impervious clothing

Stability and reactivity

1. Reactivity

See section 10.3. "Possibility of hazardous reactions"

2. Chemical stability

Stable

3. Possibility of hazardous reactions

None known.

4. Conditions to avoid

Keep away from heat.

5. Incompatible materials

not known
6. Hazardous decomposition products

No hazardous decomposition products if stored and handled as prescribed

Disposal considerations

Product
In accordance with regulations for hazardous waste, must be taken to a hazardous waste disposal site

Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste