Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-045-3 | CAS number: 91-16-7
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
- Show this safety data sheet to the doctor in attendance.
- First aider needs to protect himself.
- Place affected clothing in a sealed bag for subsequent decontamination.
- Following inhalation:
- Move to fresh air.
- If breathing is difficult, give oxygen.
- Consult a physician if necessary.
- Following skin contact:
- Take off contaminated clothing and shoes immediately.
- Wash off with soap and plenty of water.
- If symptoms persist, call a physician.
- Following eye contact:
- Rinse immediately with plenty of water for at least 15 minutes.
- If eye irritation persists, consult a physician
- Following ingestion:
- Do NOT induce vomiting.
- Rinse mouth with water.
- Do not give anything to drink.
- Consult a physician if necessary.
- Most important symptoms and effects:
- no data available
Fire-fighting measures
- Suitable extinguishing media:
- Water spray
- powder
- Carbon dioxide (CO2)
- Foam
- Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
- Unsuitable extinguishing media:
- High volume water jet
- Special hazards arising from the substance or mixture:
- On combustion, toxic gases are released.
- Combustible solid.
- Risk of dust explosion.
- Advice for fire fighter:
Special protective equipment for firefighters
- Special protective equipment for firefighters
- Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing
- Wear self-contained breathing apparatus for firefighting if necessary.
- Self-contained breathing apparatus (EN 133)
Specific fire fighting methods
- Use appropriate means for fighting adjacent fires.
- Evacuate personnel to safe areas.
- Cool containers/tanks with water spray.
Accidental release measures
.- Personal precautions & Protective equipment and emergency procedures:
- Avoid contact with eyes, skin and respiratory system.
- Remove all sources of ignition.
- Do not breathe vapour.
- Avoid dust formation.
- Ventilate the area.
- Use personal protective equipment.
- For personal protection see section "Exposure control / personnal protection" below.
- Wear respiratory protection.
- Wear suitable gloves.
- Boots
- Tightly fitting safety goggles
- Mark the contaminated area with signs and prevent access to unauthorized personnel.
- Signal word
:
- Environmental precautions:
- Do not allow uncontrolled discharge of product into the environment.
- Methods and material for containment and cleaning up:
Recovery
- Keep in properly labelled containers.
- with a closing device.
Neutralization
- Absorb residues with:
- Sawdust
Decontamination/cleaning
- Wash off with plenty of water.
Disposal
- Treat recovered material as described in the section "Disposal considerations".
Handling and storage
- Precautions for safe handling:
- Ground/bond container and receiving equipment.
- Potential dust explosion hazard.
- Non-sparking tools should be used.
- Dry powders can build static electricity charges when subjected to the friction of transfer and mixing operations.
- It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygen deficient environment.
- Use only appropriately classified electrical equipment and powered industrial trucks.
- Avoid formation of dust and aerosols.
- Use only with adequate ventilation/personal protection.
Hygiene measures
- The substance/product is registered with strictly controlled conditions as defined in Article 18(4) of Regulation (EC) No. 1907/2006 (REACH Regulation) and must therefore be handled as such.
- Ensure that eyewash stations and safety showers are close to the workstation location.
- Use clean, well-maintained personal protection equipment.
- Wash hands before breaks and at the end of workday.
- When using do not eat, drink or smoke.
- Conditions for safe storage, including any incompatibilities:
Technical measures/Storage conditions
- The floor of the depot should be impermeable and designed to form a water-tight basin.
- Keep away from open flames, hot surfaces and sources of ignition.
- Keep in a cool, well-ventilated place.
Keep away from: Strong oxidizing agents
Packaging material
Suitable material
- Stainless steel
- Polyethylene
- Glass, porcelain or stoneware
Unsuitable material
- Aluminium and its alloys.
Remarks
- Store in original container.
- glass bottles
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
- This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
- Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
- Contains no substances with occupational exposure limit values.
- Technical protection measures
Controle measures/ Engineering measures
- Effective exhaust ventilation system
- Hand protection
- Where there is a risk of contact with hands, use appropriate gloves
- Gloves must be inspected prior to use.
- Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
- Feet protection
- Safety shoes
- Body protection
- Choose body protection according to the amount and concentration of the dangerous substance at the work place.
- Remove and wash contaminated clothing.
- Protective suit
- Hygiene measures
- Ensure that eyewash stations and safety showers are close to the workstation location.
- Use clean, well-maintained personal protection equipment.
- Wash hands before breaks and at the end of workday.
- When using do not eat, drink or smoke.
- Eye protection
- Goggles
- Respiratory protection
- Use a respirator with an approved filter if a risk assessment indicates this is necessary.
- Environmental exposure controls
- Do not allow uncontrolled discharge of product into the environment.
Stability and reactivity
1. Reactivity
- No hazards to be specially mentioned.
2. Chemical stability
- Stable under recommended storage conditions.
3. Possibility of hazardous reactions
- Hazardous polymerisation does not occur.
4. Conditions to avoid
- Heat, flames and sparks.
- Static electricity
- Avoid dust formation.
5. Incompatible materials
- Strong acids
- Strong oxidizing agents
- Strong reducing agents.
6. Hazardous decomposition products
- On combustion or on thermal decomposition (pyrolysis) releases:
- Toxic Gas
- Carbon oxides
Disposal considerations
- Product Disposal
- Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
- Prohibition
- Avoid release to the environment.
- Advice on cleaning and disposal of packaging
- Allow it to drain thoroughly.
- Dispose of in accordance with local regulations.
Measures for waste avoidance. :
- Do not dispose of the product at a rubbish tip.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
