Registration Dossier

Administrative data

First-aid measures

By inhalation: In case of symptoms, move the person affected into fresh air.
By skin contact: In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of modifications on the skin (stinging, redness, rashes, blisters), seek medical advice.
By eye contact: Rinse with water until the product has been eliminated. In case of problems, consult a doctor.
By consumption: In case of consumption in large quantities, it is recommended to seek medical assistance.

Fire-fighting measures

Extinguishing media: Product is non-flammable, low risk of fire by the inflammability characteristics of the product in normal conditions of storage, manipulation and use. In the case of the existence of sustained combustion as a result of improper manipulation, storage or use any type of extinguishing agent can be used (ABC Powder, water,...)
Special hazards arising from the substance or mixture: Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use.
Advice for firefighters: Have available a minimum of emergency facilities or equipment (fire blankets, portable first aid kit,...) in accordance with Directive 89/654/EC.
Additional provisions: Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Isolate leaks provided that there is no additional risk for the people performing this task.
Environmental precautions: Product not classified as dangerous for the environment. It is not necessary to take special measures to contain the product.
Methods and material for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible absorbents.

Handling and storage

Handle the substance under strictly controlled conditions according to Article 18(4) of REACH Regulation. Rigorous containment should be achieved.

Precautions for safe manipulation: Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and destroy using safe methods.
Technical recommendations for the prevention of fires and explosions: It is recommended to transfer at a slow speed to avoid the creation of electrostatic charges that could affect flammable products.
Technical recommendations to prevent ergonomic and toxicological risks: Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
Technical recommendations to prevent environmental risks: It is not necessary to take special measures to prevent environmental risks.

Technical measures for storage: Maximun Temp.: 25 ºC
General conditions for storage: Avoid sources of heat, radiation, static electricity and contact with food.
Specific end use(s): Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this product.

Transport information

Land transport (ADR/RID)

UN number:
This product is not regulated for transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
This product is not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
This product is not regulated for transport.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
This product is not regulated for transport.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

The substance is used under strictly controlled conditions during its whole lifecycle as described under Article 18(4) and Section 2.1 of the Guidance for Intermediates.
Effectiveness: The substance should be rigorously contained by technical means during its whole lifecycle and procedural and control technologies should be in place in order to minimize emissions and any resulting exposure as described under Article 18(4).
Personal protective equipment (PPE) should be used in cases of accidents and where waste is generated. The PPE may be also used as a good practice.

Organisational protection measures: As a preventative measure it is recommended to use basic individual protection equipment, with the corresponding "CE marking" in accordance with Directive 89/686/EC. For more information on individual protection equipment (storage, use, cleaning, maintenance, class of protection,…) consult the information leaflet provided by the manufacturer.
Hand protection: Chemical protective gloves. Replace the gloves at any sign of deterioration.
Feet protection: Anti-slip work shoes.
Body protection: Work clothing (For professional use only).
Eye protection: Panoramic glasses against liquid splash. Clean daily and disinfect periodically according to the manufacturer´s instructions.
Respiratory protection: The use of protection equipment will be necessary if a mist forms or if the professional exposure limits are exceeded.

Stability and reactivity

Reactivity: No hazardous reactions are expected if the following technical instructions storage of chemicals.
Chemical stability: Chemically stable under the conditions of storage, handling and use.
Possibility of hazardous reactions: Under the conditions no hazardous reactions are expected to produce a pressure or excessive temperatures.
Hazardous decomposition products: Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.

Disposal considerations

Waste disposal in accordance with local regulations.