Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 464-320-6 | CAS number: 423772-95-6
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP study, OECD guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Deviations:
- yes
- Remarks:
- This deviation was not considered to have affected the quality or the interpretation of the results obtained.
- Qualifier:
- according to guideline
- Guideline:
- ISO 3679 (Determination of flash point - Rapid equilibrium closed cup method)
- Version / remarks:
- 2004
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- 2003-03-27
- Type of method:
- closed cup
- Key result
- Flash point:
- ca. 224.5 °C
- Atm. press.:
- ca. 101.3 kPa
- Conclusions:
- Mean flash-point of the test item (corrected at the pressure of 101.3 kPa) is
224.5°C ± 2.0°C.
Remark: taken into account the physical state of the test item (sticky paste), the required
volume to use for the assay could not have been taken accurately. - Executive summary:
FLASH-POINT
In compliance with Commission Directive 92/69/EEC - A9 method (1992) ISO Standard 3679 (1983)
AMENDMENTS
No amendment to the study plan was requested.
DEVIATIONS
The following deviation was recorded: The test item was directly sampled from its container made of plastic, and the empty part of the container could not have been determined. This deviation was not considered to have affected the quality or the interpretation of the results obtained.
RESULTS
Mean flash-point of the test item (corrected at the pressure of 101.3 kPa) is 224.5°C ± 2.0°C. Remark: taken into account the physical state of the test item (sticky paste), the required volume to use for the assay could not have been taken accurately.
Reference
Description of key information
In compliance with Commission Directive 92/69/EEC - A9 method (1992) ISO Standard 3679 (1983)
The mean flash-point of the test item (corrected at the pressure of 101.3 kPa) is 224.5°C ± 2.0°C.
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 224.5 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
