Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2002

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
GLP compliance:
yes

Test material

Reference
Name:
Unnamed
Type:
Constituent
Details on test material:
- Analytical purity: 92.5%
- Lot/batch No.: SB-OD 10010

Results and discussion

Pyrophoric solids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Pyrophoric liquids
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.

Any other information on results incl. tables

The test substance was formed into an unbroken powder train about 250mm long by 20mm wide by 10mm high. A hot flame from a gas burner was applied to one end of the powder train for 2 seconds. The test substance ignited. When the gas burner was removed the flame extinguised within a few seconds. The test substance did not burn over a length of 200mm, therefore, according to the guideline, no main test was performed.

Applicant's summary and conclusion

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
Substance did not burn over a length of 200mm. The test substance is not classified as highly flammable. The information contained within this robust summary document comes from studies which are in the ownership of Arch Chemicals Inc. and which are protected in several regions globally. This information may not be used for any purpose other than in support of the Chemical safety Report submitted by Arch Chemicals Inc. under Regulation EC 1907/2006.