Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 229-222-8
CAS number: 6440-58-0
Inhalation : Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. If symptoms persist, call a physician.
Skin contact : After contact with skin, wash immediately with plenty of soap and water. Consult a physician.
Eye contact : In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Call a physician immediately.
Ingestion : Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Suitable extinguishing media : Dry powder, Water spray, Foam
Specific hazards during fire fighting: Heating or fire can release toxic gas.
Special protective equipment for fire-fighters: In the event of fire, wear self-contained breathing apparatus.
Further information : Use water spray to cool unopened containers.
Personal precautions : Avoid dust formation. Use personal protective equipment.
Environmental precautions : Prevent product from entering drains.
Methods for cleaning up : Sweep up or vacuum up spillage and collect in suitable container for disposal. Do not flush into surface water or sanitary sewer system.
Advice on safe handling : Avoid formation of respirable particles. Provide sufficient air exchange and/or exhaust in work rooms. Avoid contact with skin and eyes.
Advice on protection against fire and explosion: Avoid dust formation. Take precautionary measures against static discharges.
Requirements for storage areas and containers: Keep container tightly closed. To maintain product quality, do not store in heat or direct sunlight. Keep in a dry, cool and well ventilated place.
Personal protective equipment
Respiratory protection : In the case of dust or aerosol formation use respirator with an approved filter. Half mask with a particle filter P2 (EN 143).
Hand protection : Suitable material : Nitrile rubber Break through time : > 480 min. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Eye protection : Safety glasses with side-shields
Skin and body protection : Choose body protection according to the amount and concentration of the dangerous substance at the work place.
No special protective equipment required.
Hygiene measures : Wash hands before breaks and immediately after handling the product. Avoid contact with skin, eyes and clothing.
Environmental exposure controls
General advice : Prevent product from entering drains.
Conditions to avoid : Avoid temperatures above 90°C.
Materials to avoid : Strong acids and strong bases, Strong oxidizing agents
Hazardous decomposition products: nitrogen oxides (NOx), Carbon oxides
Hazardous reactions : Stable under normal conditions.
Waste from residues / unused products: Dispose of in accordance with local regulations.
Contact waste disposal services.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Damit Sie die Website optimal nutzen können, verwenden wir Cookies.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again