Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-235-6
CAS number: 1314-41-6
This study assessed the in vitro absorption of lead oxide in human skin
samples at 0, 111, and 1033 ug/cm2 concentrations over 24 hours. For the
111 ug/cm2 dose, 95.63% of the applied lead was removed during the wash
at 6 hours post-exposure. At 24 hours post-exposure, 99.51% of the
applied dose was not absorbed. The absorbed dose into the receptor fluid
was <0.01% (5 ng/cm2) and the dermal delivery was 0.13% (148 mg/cm2) of
the applied dose. For the 1033 ug/cm2 dose, 96.10% of the applied lead
was removed during the wash at 6 hours post-exposure. At 24 hours
post-exposure, 98.28% of the applied dose was not absorbed. The absorbed
dose was <0.01% (10 ng/cm2) and the dermal delivery was 0.05% (479
ng/cm2) of the applied dose. The authors concluded that the apparent
decrease in absorption as a function of dose may be attributable to the
considerable background from endogenous lead in the donor skin
restricting the reliability of the absorption factor at the low dose.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again