Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

DESCRIPTION OF FIRST AID MEASURES
- After inhalation: Supply fresh air and seek medical treatment in case of complaints.
- After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
- After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- After swallowing: If swallowed, rinse mouth with water (only if the person is conscious). Induce vomiting only, if affected person is fully conscious. Drink plenty of water and provide fresh air. Call for a doctor immediately.
- Information for doctor: Treat symptomatically.

Fire-fighting measures

EXTINGUISHING MEDIA
- Suitable extinguishing agents: The product is not flammable. Use fire extinguishing methods suitable to surrounding conditions.

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
- In case of fire, the following can be released: Hydrogen fluoride (HF)

ADVICE FOR FIREFIGHTERS
- Protective equipment: Wear fully protective equipment and wear self-contained respiratory protective device.
- Additional information: Dispose of fire debris and contaminated fire-fighting water in accordance with official regulations.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
- Avoid formation of dust
- Avoid contact with the eyes and skin

ENVIRONMENTAL PRECAUTIONS
- Damp down dust with water spray.
- Do not allow to enter sewers/ surface or ground water.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
- Pick up mechanically.
- Avoid formation of dust.
- Dispose of the material collected according to regulations.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING
- Wear protective clothing.
- Prevent formation of dust.
- Provide suction extractors if dust is formed.
- Any unavoidable deposit of dust must be regularly removed.
- Avoid contact with the eyes and skin.

INFORMATION ABOUT FIRE- AND EXPLOSION PROTECTION
- Further information about storage conditions: Keep container tightly sealed and protect from humidity and water. Store in dry conditions.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not aplicable - not dangerous goods
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not aplicable - not dangerous goods
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not aplicable - not dangerous goods
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not aplicable - not dangerous goods
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

CONTROL PARAMETERS
- Ingredients with limit values that require monitoring at the workplace: WEL (Great Britain) Long-term value: 2.5 mg/m³ as F.

EXPOSURE CONTROLS AND PERSONAL PROTECTIVE EQUIPMENT
- General protective and hygienic measures: Do not eat, drink, smoke or sniff while working, be sure to clean skin thoroughly after work and before breaks. Keep away from foodstuffs, beverages and feed and avoid contact with the eyes and skin. Use skin protection cream for skin protection.
- Respiratory protection: Use suitable respiratory protective device when high concentrations are present.
- Recommended filter device for short term use: Filter P2 and Filter FFP2.
- Protection of hands: Protective gloves – Chloroprene rubber (CR), Nitrile rubber (NBR), Butyl rubber (BR). Penetration time of glove material - Value for the permeation: Level ≤ 480 min. (EN 374). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Eye protection: Tightly sealed goggles
- Body protection: Acid resistant protective clothing

Stability and reactivity

- Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.
- Possibility of hazardous reactions: Reacts with strong acids
- Conditions to avoid: No further relevant information available.
- Incompatible materials: No further relevant information available.
- Hazardous decomposition products: Hydrogen fluoride

Disposal considerations

WASTE TREATMENT METHODS
- Recommendation: Contact manufacturer for recycling information. Disposal must be made according to official regulations.
- Waste disposal key: 51541 (ÖNORM S 2100)
European waste catalogue 06 03 14
- Uncleaned packaging recommendation: Non contaminated packaging may be recycled. Packaging that may not be cleaned is to be disposed of in the same manner as the product. Disposal must be made according to official regulations.