Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 237-354-2
CAS number: 13760-80-0
The pH of the test material was determined in accordance with the TIAG
standard operating procedures AANC Determination of the pH value TIAG
standard operating procedures AANC Determination of the pH value.
Prior to measurement the pH meter was checked and calibrated with a
buffer solution in the expected measurement range. The pH meter was
calibrated via a three-point calibration. The slope of the electrode and
the result of the control buffer were either listed in the ‘Prüfmittelkontrolblatt’
or ‘calibration report’. The electrode was rinsed with H2O dem., wiped
dry and immersed for measurement into the solution. At first, 10 %
solutions of the test material were prepared by stirring 10 g of sample
material with 90 g of H2O dem. (Milli-Q water Type 1 water grade) for 30
minutes and then adjusting it to a temperature of 20 °C.
Under the conditions of the study the pH of the test material was 4.53.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again