Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Eye contact : Immediately flush eye(s) with plenty of water. Consult an oculist if necessary.
Skin contact : Wash off with soap and water. Consult a physician if necessary.
Ingestion : Rinse mouth with plenty of water. Do not induce vomiting. Consult a physician.
Inhalation : Take person to fresh air. Keep at rest. Consult a physician if necessary.

Most important symptoms and effects: Symptoms : May cause an allergic skin reaction.

Indication of immediate medical attention and special treatment needed: General advice : Call a physician immediately.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media : Water spray., Foam.
Extinguishing media which must not be used for safety reasons: Dry extinguishing powder., Carbon dioxide (CO2).

Special hazards arising from the substance or mixture: Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.

Advice for fire-fighters: Special protective equipment for fire-fighters: Regular fire intervention clothes.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Personal precautions : Cleanup personnel must use appropriate personal protective equipment.
Additional advice : Observe normal precautions when handling chemicals.

Environmental precautions: Environmental precautions : The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up: Methods for cleaning up : Remove the dust with a flameproof suck up-system. Carefully
collect leftovers. Collect spilled product in another vessel and carry off as chemical waste.
6.4 Reference to other sections:
For waste disposal see 'disposal considerations' below.
For personal protection see 'exposure control...' below.

Handling and storage

Precautions for safe handling:
Advice on safe handling : Prevent product from diffusing.Avoid dust formation.
Hygiene measures : Observe normal precautions when handling chemicals.Employees should wash their hands and face beforeeating, drinking, or using tobacco products.Keep away from foodstuffs, drinks and tobacco.
Advice on protection against fire and explosion: Use dust-explosionproof material. Avoid heat or open flame.Take precautionary measures against static discharges.

Conditions for safe storage: Requirements for storage areas and containers: Keep in a dry place.Keep container tightly closed.

Specific end use: This substance is used only by trained professionals under restricted conditions.

Transport information

Land transport (ADR/RID)

UN number:
not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:

Components with occupational exposure limits rsp. biological occupational exposure limits requiring monitoring:
Occupational exposure limits:
Air limit values: We are not aware of any national exposure limit.
Biological limit values: We are not aware of any national exposure limit.
Additional exposure limits under the conditions of use: No other exposure limits applicable.
DNEL/DMEL and PNEC-values: No Chemical Safety Report performed. No DNEL/DMEL value determined. No PNEC value determined.

Exposure controls:
Occupational exposure controls:
Instruction measures to prevent exposure: Employees should wash their hands and face before eating, drinking, or using tobacco products. Keep away from foodstuffs, drinks and tobacco.
Technical measures to prevent exposure: Ensure adequate ventilation.
Personal measures to prevent exposure:
Respiratory protection : In case of heavy air pollution a dust mask P1 is to be worn.
Hand protection : Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact use gloves made of the materials: butylrubber (thickness >= 0.70 mm, breakthrough time > 480 min).(EN 374). The use of protective gloves should conform to the specifications of EC directive 89/686/EC and the resultant standard EN374. Additional advice: The data are based on own tests, literature data and information of glove manufacturers or derived from similar substances. Because several factors may influence these properties (eg temperature), one should take into
account the fact that the life of a chemical gloves in practice may be considerably shorter than indicated by the permeation test. The high diversity of types of use are prescribed by the manufacturer.
Eye protection : Safety goggles. EN 166.
Body Protection : Safety clothes.
Personal protective equipment: Observe normal precautions when handling chemicals.
Environmental exposure controls: Effluent regulations/discharge/treatment/contents may vary from one area to another. Please consult the local regulations regarding the disposal of this material. Do not release into drain. Collect for removal by a licensed waste contractor.
EU Directive Status:
European Directive 2000/60/EC (water): not on list
European Directive 1996/62/EC (air): not on list

Stability and reactivity

Reactivity : Reactivity is not to be expected under normal conditions of temperature and pressure.
Chemical stability: The product is stable under normal conditions of storage and
use.
Conditions to avoid: Keep away from heat and sources of ignition. Protect from frost, heat and sunlight.
Materials to avoid: No data available
Hazardous decomposition products: No specified dangerous decomposition products are known.

Disposal considerations

Waste disposal methods: Do not release into drain. Collect for removal by a licensed waste contractor. Effluent regulations/discharge/treatment/contents may vary from one area to another. Please consult the local regulations regarding the disposal of this material.
Empty containers: As the packaging can be contaminated with product residus, please observe the warnings of the label even when the container is empty.Do not reuse empty container without proper cleaning.Label precautions also apply to this container when empty.
For waste resulting from the expired product, it is recommended to use European Waste Code : 20 01 17 (photochemicals).