Registration Dossier

Administrative data

First-aid measures

First aid measures
Inhalation:
Move exposed person to fresh air. Keep person warm and at rest. If not breathing,
if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. Get medical attention if symptoms occur.
Ingestion:
Wash out mouth with water. Move exposed person to fresh air. Keep person warm
and at rest. If material has been swallowed and the exposed person is conscious,
give small quantities of water to drink. Do not induce vomiting unless directed to do
so by medical personnel. Get medical attention if symptoms occur.
Skin contact:
Wash contaminated skin with soap and water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur.
Eye contact:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention if irritation occurs.
Protection of first-aiders :
No action shall be taken involving any personal risk or without suitable training.
Notes to physician:
No specific treatment. Treat symptomatically. Contact poison treatment specialist
immediately if large quantities have been ingested or inhaled.

Fire-fighting measures

FIRE-FIGHTING MEASURES

Extinguishing media
Suitable : Use an extinguishing agent suitable for the surrounding fire.
Not Suitable : None known.
Special exposure hazards :
No specific fire or explosion hazard..
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal decomposition products :
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Special protective equipment for fire-fighters :
Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Accidental release measures

ACCIDENTAL RELEASE MEASURES :
Personal precautions : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Put on appropriate personal
protective equipment (see section 8).
Environmental precautions : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Methods for cleaning up :
Small spill : Move containers from spill area. Vacuum or sweep up material and place in a
designated, labelled waste container. Dispose of via a licensed waste disposal
contractor.
Large spill : Move containers from spill area. Prevent entry into sewers, water courses,
basements or confined areas. Vacuum or sweep up material and place in a
designated, labelled waste container. Dispose of via a licensed waste disposal
contractor. Note: see section 1 for emergency contact information and section 13 for
waste disposal.

Handling and storage

HANDLING AND STORAGE
Handling : Put on appropriate personal protective equipment (see section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking.
Storage: STORE UNDER COVER. Keep away from heat
Do not store above the following temperature: 40°C (104°F). Store in accordance
with local regulations. Store in original container protected from direct sunlight in a
dry, cool and well-ventilated area, away from incompatible materials (see section 10)
and food and drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept upright to
prevent leakage. Do not store in unlabelled containers. Use appropriate
containment to avoid environmental contamination.

Packaging materials:
Recommended : Use original container

Transport information

Land transport (ADR/RID)

UN number:
Not
regulated.
Shippingopen allclose all
Class:
Not
regulated.
Classification code:
Not
regulated.
Packaging group:
Not
regulated.
Labels:
Not
regulated.
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not
regulated.
Shippingopen allclose all
Class:
Not
regulated.
Classification code:
Not
regulated.
Packaging group:
Not
regulated.
Labels:
Not
regulated.
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not
regulated.
Proper shipping name and description:
Not
regulated.
Chemical name:
Not
regulated.
Class:
Not
regulated.
Packaging group:
Not
regulated.
EmS code:
Not
regulated.
Labels:
Not
regulated.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not
regulated.
Proper shipping name and description:
Not
regulated.
Chemical name:
Not
regulated.
Class:
Not
regulated.
Packaging group:
Not
regulated.
Labels:
Not
regulated.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE CONTROLS/PERSONAL PROTECTION :
Recommended monitoring procedures: No exposure limit value known.
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to European Standard EN 689 for
methods for the assessment of exposure by inhalation to chemical agents and
national guidance documents for methods for the determination of hazardous
substances.
Exposure controls :
Occupational exposure Controls :No special ventilation requirements. Good general ventilation should be sufficient to
control worker exposure to airborne contaminants. If this product contains
ingredients with exposure limits, use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure below any recommended or
statutory limits.
Hygienes measures:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.

Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator.
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
Eye protection: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists or dusts.
Skin protection: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist before handling this product.
Environmental exposure
Controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity


STABILITY AND REACTIVITY
Chemical stability The product is stable.
Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid: No specific data.
Materials to avoid : No specific data.
Hazardous decomposition Products : Under normal conditions of storage and use, hazardous decomposition products should not be produced

Disposal considerations

Disposal consideration:
methods of disposal:
The generation of waste should be avoided or minimised wherever possible. Empty
containers or liners may retain some product residues. This material and its
container must be disposed of in a safe way. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
Hazardous wastes:
Within the present knowledge of the supplier, this product is not regarded as
hazardous waste, as defined by EU Directive 91/689/EEC.