Registration Dossier

Administrative data

Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
March 2018
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2018
Report Date:
2018

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
GLP compliance:
yes

Test material

Reference
Name:
Unnamed
Type:
Constituent
Test material form:
solid: particulate/powder
Details on test material:
Batch 44034
Description: Cream to light grey powder
Expiry date: 30 November 2019
Storage conditions: Controlled room temperature (15-25 ºC, below 70 RH%).

Results and discussion

Flammable solids
Key result
Test procedure:
other: The test item could not be ignited just charred
Remarks on result:
other: The test item could not be ignited just charred

Any other information on results incl. tables

Preparations Before the Test:

The sample was filled into a mould. Then the mould was dropped three times from a height of 2 cm onto a solid surface and the mould was filled up again. The lateral limitations were removed and the excess substance scraped off. A non-combustible and non-porous plate was placed on top of the mould. This was inverted and the mould removed.

Preliminary Test:

The flame from a gas burner was applied to one end of the powder train until the powder ignited or for a maximum of 2 minutes if there is no ignition. The test was performed two times.

Main Test:

Based on the results of the preliminary test no further testing was required.

RESULT:

In the preliminary test the test itemcould not be ignited just charred. Based on the results of the preliminary test, no main test was performed.

Applicant's summary and conclusion

Interpretation of results:
not classified based on GHS criteria
Conclusions:
The test item could not be ignited just charred. Therefore, the substance is considered not to be highly flammable.
Executive summary:

Two parallel flammability tests were performed. The tests were negative.

The test item is not highly flammable in the conditions of this test.