Registration Dossier

Administrative data

First-aid measures

- General advice: Remove/Take off immediately all contaminated clothing.
- Following inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
- Following skin contact: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse.
- Following eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
- Following ingestion: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting.
- Most important symptoms and effects: Not available

Fire-fighting measures

- Suitable extinguishing media: Carbon dioxide, foam, dry chemical or water spray.
- Unsuitable extinguishing media: Not known
- Special hazards arising from the substance or mixture: Thermal decomposition may produce harmful and irritant gas/fume such as nitrogen oxides, carbon dioxide, carbon monoxide and sulphur dioxide.
- Advice for fire fighter:
1. Protective equipment: Wear self-contained breathing apparatus and complete personal protective equipment.
2. Other information: Move containers away from fire areas if it can be done without risk. If impossible to remove containers from fire zone, cool them with water spray.

Accidental release measures

- Personal precautions: Keep away from ignition sources. Avoid contact with skin, eyes and clothing. Avoid breathing the mist or vapor.
- Protective equipment and emergency procedures:
- Environmental precautions: Avoid discharging this product or its solution into drains, ditches, river, sea or lake etc.
- Methods and material for containment and cleaning up: Obey Federal, State or local regulations for health & safety and environmental protection when accidental spills is treated.
Bank up soil or sand around spill to prevent it from flowing out to environment.
Scoop up spill with tool such as shovel, and place in closable containers.
Use inert absorbent (e.g. sand or vermiculite) to complete pick-up.
Use vacuum truck if spill is large.
Wash spill site with soap and plenty of water after material pick-up is complete

Handling and storage

- Precautions for safe handling: Avoid contact with skin, eyes and clothing.
Do not handle until all safety precautions have been read and understood.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash hands thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing should not be allowed out of the workplace.
Avoid release to the environment.
Get medical advice/attention if you would feel unwell.
Collect spillage.
- Conditions for safe storage, including any incompatibilities: Store locked up.
Store in a cool, dry, well-ventilated place. Keep container tightly closed.
Keep out of reach of children.
Keep away from direct sunlight, oxidizing agents, foods, drink and animal feedingstuffs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures: Use general and/or local exhaust ventilation to control vapor/mist. Provide safety showers and eyewashes.
2. Hand protection: Protective gloves against chemicals and microorganisms. Materials include: Nitrile, e.g. rubber or polyvinyl chloride, neoprene. Avoid gloves made of Polyvinylalcohol (PVA).
3. Skin protection: Wear suitable working wear, gloves and boots.
4. Eye protection: Use safety goggles.
5. Respiratory protection: Wear suitable respirator for organic vapor.

Stability and reactivity

1. Reactivity : Stable under normal storage and handling conditions.
2. Chemical stability : Stable under normal storage and handling conditions
3. Possibility of hazardous reactions : Hazardous polymerization does not occur.
4. Conditions to avoid : High and low (under 0 deg.C) temperature conditions.
5. Incompatible materials : Metal catalyst, oxidizing Agent, acid and basic materials.
6. Hazardous decomposition products: Thermal decomposition or combustion may produce toxic and irritant gas or fume such as COx and so on.

Disposal considerations

Waste treatment methods:
1) Consult the appropriate local authorities about special requirement.
2) Dispose of contents/container in accordance with local /national/international regulations.