Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 233-823-0 | CAS number: 10377-52-3
Guidance on Safe Use
Administrative data
First-aid measures
DESCRIPTION ON FIRST AID MEASURES
Eyes: Flush with water for at least 15 minutes. If irritation occurs and persists, contact a medical doctor.
Skin: Remove contaminated clothing and thoroughly wash with soap and water. If irritation occurs and persists, contact a medical doctor.
Ingestion: Drink 1 or 2 glasses of water. Never give anything by mouth to an unconscious person. If any discomfort persists, obtain medical attention.
Inhalation: Remove to fresh air. If breathing difficulty or discomfort occurs and persists, obtain medical attention.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
This product is expected to have low acute oral toxicity. It may be irritating to the skin, eyes, respiratory tract and mucous membranes.
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED.
NOTES TO MEDICAL DOCTOR:
Effects of overexposure to lithium ion are well documented in the medical literature. Low toxicity is anticipated. In such cases, standard protocols for overdosage are suggested. Treatment is otherwise symptomatic and supportive.
Fire-fighting measures
EXTINGUISHING MEDIA: Dry chemical, CO2, water spray or regular foam.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE:
Hazardous combustion products: None
General Hazard: No known physical hazard, non-combustible.
Properties contributing to Flammability: None
Flashpoint: Not applicable
Flammable limits in air: Upper: Not available Lower: Not available.
Auto ignition temperature: Not applicable
Sensitivity to static discharge: Not applicable
Sensitivity to static impact: Not applicable
ADVICE FOR FIRE-FIGHTERS:
Wear full protective clothing and self-contained breathing apparatus (SCBA) approved for fire fighting. This is necessary to protect against the hazards of heat, products of combustion and oxygen deficiency. Do not breathe smoke, gases or vapors generated.
Accidental release measures
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
Before cleanup measures begin, review the entire SDS with particular attention to Section "Hazards Identification"; and Section "Exposure Controls/Personal Protection".
ENVIRONMENTAL PRECAUTIONS:
Do not wash into drains. Dispose of at qualified waste disposal facility.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
Sweep up and place in suitable container. Dispose of waste according to local and Federal laws and regulations.
REFERENCE TO OTHER SECTIONS:
Before cleanup measures begin, review the entire SDS with particular attention to Section "Hazards Identification"; and Section "Exposure Controls/Personal Protection".
ADDITIONAL INFORMATION:
Not specified.
Handling and storage
PRECAUTIONS FOR SAFE HANDLING:
Avoid contact with eyes, skin or clothing. Use with adequate ventilation. Wear safety glasses or goggles and rubber gloves. Wash thoroughly after handling.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
Keep container closed.
SPECIAL END USE(S):
Not available. Chemical safety assessment has not been completed for this product.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- None
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- None
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- None
Shipping information
- Proper shipping name and description:
- None
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- None
Shipping information
- Proper shipping name and description:
- None
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
ENGINEERING CONTROLS:
Use local exhaust ventilation to keep airborne concentrations below exposure limits.
PERSONAL PROTECTIVE EQUIPMENT:
Eyes and Face: Safety glasses or goggles
Respiratory: When engineering controls are not adequate, wear a respirator approved for protection against inorganic dusts.
US: NIOSH or MSHA approved
Europe: CEN Class P type
PROTECTIVE CLOTHING:
Gloves: Nitrile/Neoprene/PVC/Natural Rubber (permeation breakthrough not detected during 6 hr test)
These glove recommendations should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors such as concentration and temperature, glove thickness and glove reuse, may affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip need to be considered in making your final selection.
Other: Not specified.
WORK HYGIENIC PRACTICES: Quick-drench eyewash and safety shower.
Stability and reactivity
Reactivity: Generally stable and non reactive
Chemical stability: Stable
Possibility of hazardous reaction: Hazardous polymerization will not occur.
Conditions to avoid: None
Incompatible materials: None
Hazardous decomposition products: None
Disposal considerations
Waste treatment methods: Use a qualified industrial waste disposal facility. Dispose of waste according to local and Federal laws and regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
