Registration Dossier

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
04 October 2016 to 19 December 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Reason / purpose:
reference to same study
Reason / purpose:
reference to same study
Reason / purpose:
reference to same study
Reason / purpose:
reference to same study
Qualifier:
according to
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Version / remarks:
2012
Deviations:
no
Qualifier:
according to
Guideline:
EU Method A.3 (Relative Density)
Version / remarks:
2008
Deviations:
no
Qualifier:
according to
Guideline:
EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
Version / remarks:
2002
Deviations:
no
GLP compliance:
yes
Type of method:
air comparison pycnometer (for solids)
Key result
Type:
density
Density:
1.32 g/cm³
Temp.:
20 °C
Key result
Type:
relative density
Density:
1.32
Temp.:
20 °C

The individual measurements were obtained with an accuracy of < 0.02 g/cm³.

 

- Measurement 1: 1.324 g/cm³

- Measurement 2: 1.321 g/cm³

- Mean: 1.32 g/cm³

Conclusions:
Under the conditions of this study, the density of the test material at 20 °C was 1.32 g/cm³. The relative density was 1.32.
Executive summary:

The density and relative density of the test material were determined in accordance with the standardised guidelines OECD 109, EU Method A.3 and US EPA OPPTS 830.7300 under GLP conditions using a gas comparison stereopycnometer.

Under the conditions of this study, the density of the test material at 20 °C was 1.32 g/cm³. The relative density was 1.32.

Description of key information

The density of the test material at 20 °C was 1.32 g/cm³. The relative density was 1.32.

Key value for chemical safety assessment

Relative density at 20C:
1.32

Additional information

The density and relative density of the test material were determined in accordance with the standardised guidelines OECD 109, EU Method A.3 and US EPA OPPTS 830.7300 under GLP conditions using a gas comparison stereopycnometer. The study was awarded a reliability score of 1 in accordance with the criteria set forth by Klimisch et al. (1997).

Under the conditions of this study, the density of the test material at 20 °C was 1.32 g/cm³. The relative density was 1.32.