Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

1. Description of first aid measures
1.1. If inhaled
- Move to fresh air.
- If symptoms persist, call a physician.
1.2. In case of eye contact
- In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
- If eye irritation persists, consult a specialist.
1.3. In case of skin contact
- Wash off with soap and water.
1.4. If swallowed
- Rinse mouth with water.
- Do NOT induce vomiting.

2. Most important symptoms and effects, both acute and delayed
2.1. Inhalation
- May cause nose, throat, and lung irritation.
2.2. Skin contact
- Prolonged skin contact may cause skin irritation.
2.3. Eye contact
- May cause eye irritation.
2.4. Ingestion
- Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

3. Indication of any immediate medical attention and special treatment needed
- If accidentally swallowed obtain immediate medical attention.
- When symptoms persist or in all cases of doubt seek medical advice.

Fire-fighting measures

1. Extinguishing media
1.1. Suitable extinguishing media
- Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
1.2. Unsuitable extinguishing media
- None.

2. Special hazards arising from the substance or mixture
- Hazardous decomposition products formed under fire conditions.

3. Advice for firefighters
- Exposure to decomposition products may be a hazard to health.
- In the event of fire, wear self-contained breathing apparatus.
- Use personal protective equipment.
- Cool containers / tanks with water spray.
- Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
1.1. Advice for non-emergency personnel
- Evacuate personnel to safe areas.
- Avoid dust formation.
1.2. Advice for emergency responders
- Use personal protective equipment.
- Sweep up to prevent slipping hazard.
- Prevent further leakage or spillage.
2. Environmental precautions
- Should not be released into the environment.
- Do not flush into surface water or sanitary sewer system.
3. Methods and materials for containment and cleaning up
- Pick up and transfer to properly labeled containers.
- Keep in suitable, closed containers for disposal.

Handling and storage

1. Precautions for safe handling
- Ensure adequate ventilation.
- Keep away from heat and sources of ignition.
- Keep away from Incompatible products.

2. Conditions for storage, including incompatibilities
2.1. Storage
- Store in original container.
- Keep in a well-ventilated place.
- Keep in a dry place.
- Keep in properly labelled containers.
- Keep container closed.
- Keep away from Incompatible products.
2.2. Packaging material
2.2.1. Suitable material
- Paper + PE.
- Conductive PE + carton
2.2.2. Unsuitable material
- no data available

3. Specific end uses
- For further information, please contact: Supplier

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not regulated
Shippingopen allclose all
Special provisions / remarks
not regulated

Additional transport information

Additional information
Special provisions / remarks / other:
not regulated

Exposure controls / personal protection

1. Appropriate engineering controls
- Provide appropriate exhaust ventilation at places where dust is formed.
- Apply technical measures to comply with the occupational exposure limits.

2. Individual protection measures
2.1. Respiratory protection
- Use only respiratory protection that conforms to international/ national standards.
- Respirator with a particle filter (EN 143)
- Recommended Filter type: P2
2.2. Hand protection
- Wear suitable gloves.
- Neoprene
2.3. Eye protection
- Safety goggles
2.4. Skin and body protection
- Dust impervious protective suit
2.5. Hygiene measures
- Eye wash bottles or eye wash stations in compliance with applicable standards.
- When using do not eat, drink or smoke.
- Wash hands before breaks and at the end of workday.
- Handle in accordance with good industrial hygiene and safety practice.

3. Environmental exposure controls
- Dispose of rinse water in accordance with local and national regulations.

Stability and reactivity

1. Reactivity
- None known.
2. Chemical stability
- Stable under recommended storage conditions.
3. Possibility of hazardous reactions
- None known.
4. Conditions to avoid
- Heat.
5. Incompatible materials
- Incompatible with strong acids and bases.
6. Hazardous decomposition products
- Hydrogen fluoride

Disposal considerations

1. Waste treatment methods
- In accordance with local and national regulations.
- Refer to manufacturer/supplier for information on recovery/recycling.
- Dilute with plenty of water.
- Can be eliminated from water by precipitation.
- Filtrate the product and send the cake to a landfill for industrial waste.
- After neutralization, the filtrate can be discharged in the sewer.

2. Contaminated packaging
- Clean container with water.
- The empty and clean containers are to be reused in conformity with regulations.
- To avoid treatments, as far as possible, use dedicated containers.

Categories Display