Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 219-787-9 | CAS number: 2530-87-2
Guidance on Safe Use
Administrative data
First-aid measures
General advice
Take off all contaminated clothing immediately.
Inhalation
If aerosol or mists are formed:
Move victims into fresh air.
In case of persistent discomfort: Consult doctor immediately.
Skin contact
Wash off immediately with plenty of water.
In case of discomfort: Supply with medical care.
Eye contact
Keeping eyelid open, immediately rinse thoroughly for at least 5 minutes using plenty of water or, if necessary, eye rinsing solution.
In case of persistent discomfort: Consult an ophthalmologist.
Ingestion
Have the mouth rinsed with water.
Consult a physician immediately.
Notes to physician
After absorbing large amounts of substance:
Liberation of reaction products (Methanol) can lead to symptoms of poisoning.
Possible signs of poisoning:
daze, dizziness, nausea, colicky abdominal pain, respiratory disturbance.
Symptoms upon increasing intoxication: dysopia, loss of eyesight.
Treatment:
Immediate gastric lavage. Antidote treatment, correction of acid-base balance.
Detection of substance (Methanol) possible in:
Blood
Antidote treatment: ethanol.
Fire-fighting measures
Suitable extinguishing media
foam, water spray, CO2, dry powder
Specific hazards during fire fighting
Hazardous fumes in fires, specific to the product:
hydrogen chloride
Special protective equipment for fire-fighters
In case of fire: wear a self contained respiratory apparatus
Further information
Water used to extinguish fire should not enter drainage systems, soil or stretches of water.
Ensure there are sufficient retaining facilities for water used to extinguish fire.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions
Handle in accordance with good industrial hygiene and safety practices.
Environmental precautions
Do not allow substance to enter soil, bodies of water or sewage canals.
Methods for cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Transfer into suitable containers.
To be disposed of in compliance with existing regulations.
Suitable binder: sand (for damming up), sawdust, universal absorbent
Handling and storage
Safe handling advice
Ensure sufficient ventilation.
Application, processing: Provide good ventilation or extraction.
Advice on protection against fire and explosion
Keep away from sources of ignition - No smoking.
Storage
Requirements for storage areas and containers
Keep containers tightly closed in a cool, well-ventilated place.
Protect from moisture.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Components with workplace control parameters
• Methanol
CAS-No. 67-56-1 EC-No.
200-659-6
Control parameters 200 ppm
260 mg/m3 Time Weighted Average (TWA):(EU ELV)
Control parameters Skin designation:(EU ELV)
Can be absorbed through the skin.
Engineering measures
Provide adequate ventilation.
Personal protective equipment
Respiratory protection
In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded:
use respiratory equipment with suitable filter (filter type ABEK) or wear a self contained respiratory apparatus
Use only respiratory protection equipment with CE-symbol including four digit test number.
The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.
Note time limit for wearing respiratory protective equipment.
Hand protection
Glove material for example, butyl-rubber
Material thickness 0,5 mm
Break through time >= 480 min
Glove material for example, Fluorinated rubber (Viton)
Material thickness 0,4 mm
Break through time >= 480 min
Selection of protective gloves to meet the requirements of specific workplaces.
Suitability for specific workplaces should be clarified with protective glove manufacturers.
The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by analogy with similar materials.
Remember that the useful time per day of a chemical protection glove may be much shorter than the permeation time determined according to EN 374 due to the many different influential factors involved (e.g. temperature).
Eye protection
safety glasses
Hygiene measures
When using, do not eat, drink or smoke. Wash face and/or hands before break and end of work.
Remove contaminated or saturated clothing.
Wash contaminated clothing before re-use.
Protective measures
Handle in accordance with good industrial hygiene and safety practices.
If the limits at the workplace are exceeded and/or larger amounts are released (leakage, spilling, dust) the indicated respiratory protection should be used.
If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used.
Do not breathe in vapours or aerosols.
Stability and reactivity
Hazardous decomposition products
Methanol in case of hydrolysis.
Thermal decomposition
< 150 °C
(literature value)
Hazardous reactions
No dangerous reactions known.
Disposal considerations
Product
With respect to local regulations, e.g. dispose of to suitable waste incineration plant.
Uncleaned packaging
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.
Other countries: observe the national regulations.
Waste Key Number
No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer.
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
