Registration Dossier

Administrative data

First-aid measures

General Information
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.

Description of first aid measures
Inhalation
Remove to fresh air. If breathing is difficult, give oxygen. If the affected person is not breathing, apply artificial respiration. Induce artificial respiration with the the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.

Skin contact
Wash off with soap and water. Get medical attention if irritation develpps or persists.

Eye contact
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Get medical attention if irritation develops or persists.

Ingestion
Have victim rinse mouth thoroughly with water. Never give anything by mouth to a victim who is unconscious or is having convulsions. If swallowed, do NOT induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Get medical attention.

Most important symptoms and effects, both acute and delayed.
Not available.

Indication of any immediate medical attention and special treatment needed.
Not available.

Fire-fighting measures

General fire hazards
May cause asphyxiation in high concentrations.

Extinguishing media
Suitable extinguishing media
Small Fires: Dry chemica, CO2, water spray or regular foam.
Large Fires: Water spray, fog or regular foam.

Unsuitable extinguishing media
Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture
Dusts at sufficient concentrations can form explosive mixtures with air.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

Advice for firefighters
Special protective equipment for firefighters
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and fask mask.

Special firefighter procedures.
Move containers from fire area if you can do it without risk. Do not scatter spilled material with high pressure water streams.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
Do not touch or walk through spilled material.

For emergency responders
Keep unnecessary personnel away. Do not touch damaged containers or spilled materials unless wearing appropriate protective clothing.

Environmental precautions
Prevent further leakage or spilleage if safe to do so.

Methods and materials for containment and cleaning up
Stop the flow of material, if this is without risk. Prevent entry into waterways, sewers, basements or confined areas. Cover powder spill with plastic sheet or tarp to minimise spreading. Sweep up or gather material and place in appropriate container for disposal. Pick up and arrange disposal without creating dust. Avoid dust formation.

Handling and storage

Control parameters
Occupational exposure limits: No exposure limits noted for the ingredient(s).
Biological limit values: No biological exposure limits noted for the ingredient(s).
Recommended monitoring procedures: Not available.
DNEL: Not available.
PNEC: Not available.

Exposure controls
Appropriate engineering controls
Keep formation of airborne dusts to a minimum. Use explosion-proof ventilation equipment. Ventilation should be sufficient to effectively remove and prevent buildup of any dusts or fumes that may be generated during handling or thermal processing.

Individual protection measures, such as personal protective equipment
General information: Keep formation of dusts, particulates and fumes to a minimum.
Eye/face protection: Wear dust googles.
Skin protection: -Hand protection: Use impervious gloves. Nitrile rubber. Permeation rate: >480 min. Thickness: > 0.5 mm.
Latex gloves. Permeation rate: >480 min. Thickness: >0.5mm

Other: Wear appropriate chemical resistant clothing.

Respiratory protection
In the case of repirable dust and/or fumes, use self-contained breathing apparatus. Use a positive-pressure air-supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air-purifying respirators may not provide adequate protection.

Thermal hazards: Not availalbe.

Hygiene measures: Use good industrial hygiene practices in handling this material. Wash hands before breaks and at the end of workday. Keep away from food, drink and animal feeding stuffs.

Environmental exposure controls: Not available.

Transport information

Land transport (ADR/RID)

UN number:
Not regulated as dangerous goods.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated as dangerous goods.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated as dangerous goods.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated as dangerous goods.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls: Keep formation of airborne dusts to a minimum. Use explosion-proof ventilation equipment. Ventilation should be sufficient to effectively remove and prevent buildup of any dusts or fumes that may be generated during handling or thermal processing.

Individual protection measures, such as personal protective equipment
General information: Keep formation of dusts, particulates and fumes to a minimum.
Eye/face protection: Wear dust goggles.
Skin protection - Hand protection: Use impervious gloves.
Nitrile rubber: Permenation rate: >480 min. Thickness: >0.5 mm.
Latex gloves: Permeation rate: >480 min. Thickness: >0.5 mm.

Other: Wear appropriate chemical resistant clothing.
Respiratory protection: In the case of respirable dust and/or fumes, use self-contained breathing apparatus. Use a postive-pressure air-supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air-purifying respirators may not provide adequate protection.

Hygiene measures: Use good industrial hygiene practices in handling this material.. Wash hands before breaks and at the end of workday. Keep away from food, drink and animal feeding stuffs.

Stability and reactivity

Reactivity: Strong acids and oxidizing agents
Chemical stability: Stable under normal conditions. High concentration of airborne dust may form explosive mixture with air.
Possibility of hazardous reactions: Not expected to occur.
Conditions to avoid: Do not expose to temperatures above 200°C.
Incompatible materials: Strong acids, alkalies and oxdizing agents.
Hazardous decomposition products: At thermal decomposition temperatures, carbon monoxide and carbon dioxide.

Disposal considerations

Waste treatment methods
Residual waste: Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner.

Contaminated packaging: Dispose of as unused product. Do not re-use empty containers.

EU waste codes: Waste codes should be assigned by the user based on the application for which the product was used.

Disposal mehtod/information: Dispose in accordance with all applicable regulations