Nadide

Guidance on Safe Use

First-aid measures

General advice:

- Do not leave the victim unattended.

 

If inhaled:
- If unconscious place in recovery position and seek medical advice.
- If symptoms persist, call a physician.

In case of skin contact:
- If on skin, rinse well with water.

 

In case of eye contact :
- Immediately flush eye(s) with plenty of water-
- Remove contact lenses.
- Protect unharmed eye. 
- Keep eye wide open while rinsing.
- If eye irritation persists, consult a specialist.

 

If swallowed :
- Keep respiratory tract clear.
- Do not give milk or alcoholic beverages.
- Never give anything by mouth to an unconscious person.
- If symptoms persist, call a physician.
- Rinse mouth with water.

Fire-fighting measures

Extinguishing media:
- Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
- Unsuitable extinguishing media: High volume water jet

Special hazards arising from the substance or mixtur
- Specific hazards during fire fighting: Do not allow run-off from fire fighting to enter drains or water courses.
- Hazardous combustion products: In case of fire hazardous decomposition products may be produced such as: Oxides of phosphorus, Nitrogen oxides (NOx), Carbon oxides

Advice for firefighters
- Special protective equipment for fire-fighters: Wear self contained breathing apparatus for fire fighting if necessary.
- Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

 

Accidental release measures

Personal precautions:
- Avoid dust formation.
- Avoid breathing dust.

Environmental precautions:
- Prevent product from entering drains.
- Prevent further leakage or spillage if safe to do so.
- Local authorities should be advised if significant spillages cannot be contained.

Methods and materials for containment and cleaning up
- Methods for cleaning up: Keep in suitable, closed containers for disposal. Use neutralizing agents.

 

Handling and storage

Precautions for safe handling

Advice on safe handling:
- Smoking, eating and drinking should be prohibited in the application area.
- Dispose of rinse water in accordance with local and national regulations.

Advice on protection against fire and explosion:
- Provide appropriate exhaust ventilation at places where dust is formed.

Hygiene measures:
- When using do not eat or drink. When using do not smoke.
- Wash hands before breaks and at the end of workday.

 

Conditions for safe storage, including any incompatibilities

Requirements for storage areas and containers:
- Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Electrical installations / working materials must comply with the technological safety standards.Electrical installations / working materials must comply with the technological safety standards.

Advice on common storage:
- Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.

Storage class (TRGS 510):
- 13, Non Combustible Solids

Storage temperature:
- to 50 °C
- Protected from heat and light

Further information on storage stability:
- Keep in a dry place.
- No decomposition if stored and applied as directed.

Packaging material:
- Suitable material: Stainless steel, Polyethylene bag in metal drum, glass

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Not dangerous goods in the meaning of ADR/RID, ADNR, IMDG-Code, ICAO/IATA-DGR

SpecialProvisions

Exposure controls / personal protection

Personal protective equipment

Eye protection:
- Eye wash bottle with pure water
- Tightly fitting safety goggles
- Use eye protection according to EN 166.

Hand protection
- In case of contact through splashing:
Material : Nitrile rubber
Break through time : > 30 min
Glove thickness : > 0,11 mm
- In case of full contact:
Material : butyl-rubber
Break through time : > 480 min
Glove thickness : > 0,4 mm
- Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Skin and body protection:
- Dust impervious protective suit
- Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stability and reactivity

Reactivity:
- No data available.

Chemical stability:
- No data available.

Hazardous reactions:
- No dangerous reaction known under conditions of normal use.
- No decomposition if stored and applied as directed.
- Dust may form explosive mixture in air.

Conditions to avoid:
- No data available

Materials to avoid:
- No data available

Hazardous decomposition products:
- No data available

Disposal considerations

Product:
- The product should not be allowed to enter drains, water courses or the soil.
- Do not contaminate ponds, waterways or ditches with chemical or used container.
- Send to a licensed waste management company.
- Can be disposed as waste water, when in compliance with local regulations.

Contaminated packaging:
- Empty remaining contents.
- Dispose of as unused product.
- Empty containers should be taken to an approved waste handling site for recycling or disposal.
- Do not re-use empty containers.