Registration Dossier

Administrative data

First-aid measures

First-Aid Measures
Description of first aid measures
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion:
Rinse mouth and then drink plenty of water.
Most important symptoms and effects, both acute and delayed
Symptoms: No significant symptoms are expected due to the non-classification of the product.
Indication of any immediate medical attention and special treatment needed
Treatment: Symptomatic treatment (decontamination, vital functions).

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
dry powder, foam
Unsuitable extinguishing media for safety reasons:
water
Special hazards arising from the substance or mixture
Burning produces harmful and toxic fumes.
Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up
For large amounts: Dike spillage. Cover with blanket of foam (alcohol-resistant foam). Vacuum up
spilled product.
For residues: Pick up with suitable absorbent material.
Dispose of absorbed material in accordance with regulations.
Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found
in section 8 and 13.

Handling and storage

Precautions for safe handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should
be kept handy.
Conditions for safe storage, including any incompatibilities
Suitable materials for containers: High density polyethylene (HDPE), glass, Low density polyethylene
(LDPE), Stove-lacquer RDL 50
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
Protect against heat.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Gas filter for gases/vapours of organic
compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2,
corresponding > 30 minutes of permeation time according to EN 374)
butyl rubber (butyl) - 0.7 mm coating thickness
nitrile rubber (NBR) - 0.4 mm coating thickness
fluoroelastomer (FKM) - 0.7 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of
dust)., Anti-static protective clothing
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Hands and/or face should be
washed before breaks and at the end of the shift.

Stability and reactivity

Reactivity
Corrosion to metals: Corrosive effects to metal are not anticipated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions if stored and handled as prescribed/indicated.
Conditions to avoid
Avoid all sources of ignition: heat, sparks, open flame. Avoid electro-static charge.
Incompatible materials
Substances to avoid:
No substances known that should be avoided.
Hazardous decomposition products
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated

Disposal considerations

Waste treatment methods
Observe national and local legal requirements.