Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Eye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.Skin Contact:After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.Serious Skin Contact:Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.Serious Inhalation: Not available.Ingestion:Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.Serious Ingestion: Not available.

Fire-fighting measures

Extinguishing mediaSuitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Special hazards arising from the substance or mixtureCarbon oxides, Sulphur oxidesAdvice for firefightersWear self contained breathing apparatus for fire fighting if necessary.Further informationno data available

Accidental release measures

Personal precautions, protective equipment and emergency procedures:Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.Environmental precautionsDo not let product enter drainsMethods and materials for containment and cleaning up:Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.Reference to other sections:For disposal see section 13.

Handling and storage

Precautions:Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Wear suitable protective clothing In case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyesStorage:Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE CONTROLS/PERSONAL PROTECTIONControl parametersComponents with workplace control parametersExposure controlsAppropriate engineering controlsHandle in accordance with good industrial hygiene and safety practice. Wash hands before breaks andat the end of workday.Personal protective equipmentEye/face protectionSafety glasses with side-shields conforming to EN166 Use equipment for eye protection testedand approved under appropriate government standards such as NIOSH (US) or EN 166(EU).Skin protectionHandle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC andthe standard EN 374 derived from it.Body Protectionimpervious clothing, The type of protective equipment must be selected according to theconcentration and amount of the dangerous substance at the specific workplace.Respiratory protectionFor nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higherlevel protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.Use respirators and components tested and approved under appropriate government standardssuch as NIOSH (US) or CEN (EU).

Stability and reactivity

Reactivityno data availableChemical stabilityno data availablePossibility of hazardous reactionsno data availableConditions to avoidno data availableIncompatible materialsStrong oxidizing agentsHazardous decomposition productsOther decomposition products - no data available

Disposal considerations

Waste treatment methodsProductOffer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.Contaminated packagingDispose of as unused product