Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 236-112-3 | CAS number: 13170-23-5
Guidance on Safe Use
Administrative data
First-aid measures
General information:
Personal protection for the First Aider.
Immediately remove any clothing soiled by the product.
After inhalation:
Take affected persons into fresh air and keep quiet.
Call a doctor immediately.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:
Call a doctor immediately.
Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing:
Rinse out mouth and then drink plenty of water.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Fire-fighting measures
Extinguishing media:
Suitable extinguishing agents:
Fire-extinguishing powder
Carbon dioxide
Foam
Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide (CO)
Nitrogen oxides (NOx)
Advice for firefighters:
Protective equipment: Wear self-contained respiratory protective device.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Do not allow to penetrate the ground/soil.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Send for recovery or disposal in suitable receptacles.
Dispose of the material collected according to regulations.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to disposal consideration section.
Ensure adequate ventilation.
Handling and storage
Handling:
Precautions for safe handling Store in cool, dry place in tightly closed receptacles.
Information about fire - and explosion protection: No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility:
Store away from water.
Store away from oxidizing agents.
Further information about storage conditions:
Protect from humidity and water.
Keep container tightly sealed.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 3265
Shipping information
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Diacetoxydi-tert-butoxysilane (BDAC))
- Chemical name:
- Diacetoxydi-tert-butoxysilane (BDAC)
- Language:
- English
- Labels:
- 8
Special provisions / remarks
- Remarks:
- Danger code (Kemler): 80
Tunnerl restriction code: E
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 3265
Shipping information
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Diacetoxydi-tert-butoxysilane (BDAC))
- Chemical name:
- Diacetoxydi-tert-butoxysilane (BDAC)
- Labels:
- 8
Special provisions / remarks
- Remarks:
- Segregation groups: acids
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 3265
Shipping information
- Proper shipping name and description:
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Diacetoxydi-tert-butoxysilane (BDAC))
- Chemical name:
- Diacetoxydi-tert-butoxysilane (BDAC)
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls:
Personal protective equipment:
General protective and hygienic measures:
Do not eat, drink, smoke or sniff while working.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Standards of Personal Protective Equipment
Respiratory protection EN 136, 140, 149
Eye protection EN 166
Body protection EN 340, 463, 468, 943-1, 943-2
Protection of hands EN 374
Safety shoes EN-ISO 20345
Respiratory protection:
Suitable respiratory protective device recommended.
Short term filter device:
ABEK-Filter
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable:
Butyl rubber, BR
Eye protection:
Tightly sealed goggles
Body protection: Protective work clothing
Stability and reactivity
Reactivity:
Chemical stability:
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
· Possibility of hazardous reactions
Reacts with water.
Reacts with acids.
Reacts with alkali (lyes).
Reacts with alcohols.
Reacts with amines.
Reacts with strong oxidizing agents.
Contact with water will cause spontaneous hydrolysis (Can be explosive!).
Develops toxic gases/fumes.
Develops corrosive gases/fumes.
Hazardous decomposition products: Ethanoic acid
Disposal considerations
Waste treatment methods:
Recommendation:
After prior treatment product has to be disposed of in an incinerator for hazardous waste adhering to the regulations pertaining to the disposal of particularly hazardous waste.
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
