Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-202-6 | CAS number: 1313-13-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures.
Nevertheless, observance of good industrial hygiene is recommended.
Most important symptoms and effects, both acute and delayed.
No episodes of damage to health ascribable to the product have been reported.
Fire-fighting measures
Extinguishing media.
SUITABLE EXTINGUISHING MEDIA
The extinction equipment should be of the conventional kind: carbon dioxide, foam, powder and nebulised water.
EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONS
None in particular.
Special hazards arising from the substance or mixture.
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products (carbon oxide, toxic pyrolysis products, etc).
Advice for firefighters.
GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for
health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of
contaminated water used for extinction and the remains of the fire according to applicable regulations.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Hardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cut proof
and dielectric), a depressurised mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) in the event
of large quantities of fume
Accidental release measures
Personal precautions, protective equipment and emergency procedures.
Use breathing equipment if fumes or powders are released into the air.
Environmental precautions.
The product must not penetrate the sewers, surface water, ground water and neighbouring areas.
Methods and material for containment and cleaning up.
Confine using earth or inert material. Collect as much material as possible and eliminate the rest using jets of water. Contaminated material
should be disposed of in compliance with the provisions set forth in point 13.
Reference to other sections.
Any information on personal protection and disposal is given in sections 8 and 13.
Handling and storage
Precautions for safe handling.
Store in closed, labelled containers.
Conditions for safe storage, including any incompatibilities.
Normal storage conditions without particular incompatibilities.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Exposure controls.
As the use of adequate technical equipment must always take priority over personal protection equipment, make sure that the workplace is
well aired through effective local aspiration or bad air vent. If such operations do not make it possible to keep the concentration of the product
below the permitted workplace exposure thresholds a suitable respiratory tract protection must be used. See product label for hazard details
during use. Ask your chemical substance suppliers for advice when choosing personal protection equipment. Personal protection equipment
must comply with the rules in force indicated below.
HAND PROTECTION
Protect hands with category I (ref. Directive 89/686/EEC and standard EN 374) work gloves, such as those in latex, PVC or equivalent. The
following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to
preparations should be checked before use, as it can be unpredictable. Gloves’ limit depends on the duration of exposure.
EYE PROTECTION
Use of protective airtight goggles (ref. standard EN 166) recommended.
SKIN PROTECTION
Wear category I professional long-sleeved overalls and safety footwear (ref. Directive 89/686/CEE and standard EN 344). Wash body with
soap and water after removing overalls.
RESPIRATORY PROTECTION
If the threshold value for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction
established by the company’s prevention and protection service is exceeded, wear an FFP3 (ref. standard EN 141) type half mask.
The use of breathing protection equipment, such as masks with organic vapour and dust/mist cartridges, is necessary in the absence of
technical measures limiting worker exposure. The protection provided by masks is in any case limited.
If the substance in question is odourless or its olfactory threshold is higher than the relative exposure limit and in the event of an emergency,or when exposure levels are unknown or the concentration of oxygen in the workplace is less than 17% volume, wear self-contained,open-circuit compressed air breathing apparatus (ref. standard EN 137) or fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece (ref. standard EN 138).
In the presence of risks of exposure to splashes or squirts during work, adequate mouth, nose and eye protection should be used to prevent accidental absorption.
Stability and reactivity
Reactivity.
There are no particular risks of reaction with other substances in normal conditions of use.
Chemical stability.
The product is stable in normal conditions of use and storage.
Possibility of hazardous reactions.
No hazardous reactions are foreseeable in normal conditions of use and storage.
Conditions to avoid.
None in particular, however the usual precautions used for chemical products should be respected.
Hazardous decomposition products.
In the event of thermal decomposition or fire, vapours potentially dangerous to health may be released.
Disposal considerations
Waste treatment methods.
Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product
should be evaluated according to applicable regulations.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.