Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-851-5 | CAS number: 100-42-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Uses by professional workers
Documentsopen allclose all
Uses by professional workers
- Name:
- Styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- Styrene
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: 22
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Monomer bound in a polymer, will not be expected to have any release to the environment
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Pot-man handling and mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Application of the Coating
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives.
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, Application of chemical anchoring (indoor). castings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environment. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- outdoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- outdoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
- Route affected:
- inhalation
Effectiveness
- Route affected:
- inhalation
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- Styrene
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives.
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, Application of chemical anchoring (indoor). castings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environment. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8f Wide dispersive outdoor use resulting in inclusion into or onto a matrix
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- dermal
- Place of use:
- outdoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- outdoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Route affected:
- inhalation
- Route affected:
- inhalation
- Place of use:
- indoor
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Effectiveness
Effectiveness
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Exposure of workers
ExpEstopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
- Application of site specific biological STP sludge on agricultural soil:
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8). Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8). Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8). Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 14: Metal surface treatment products
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22:Professional use:Public domain(administration,education,entertainment, services,craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives.
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, Application of chemical anchoring (indoor). castings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environment. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Name of activity / technique:
- Widespread use of reactive processing aid.
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Roller application / brushing and non industrial spraying.
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 0: Other: Vinyl ester resin based industrial/commercial coating and flooring systems installed by professional applicators.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- Styrene
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Product category used:
- PC 0: Other: FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.)
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
- Application of site specific biological STP sludge on agricultural soil:
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other:
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- styrene
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives.
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, Application of chemical anchoring (indoor). castings
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environment. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3, SU 22.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Non industrial spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
- Application of site specific biological STP sludge on agricultural soil:
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ERC 8F)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring (PROC 3)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation (PROC 4)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (PROC 5)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (PROC 8A)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (PROC 8A)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. Application of chemical anchoring (indoor). (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an enclosed cabin or under spot ventilation. Examples are spray lamination, gelcoat spraying and “chop-hoop” filament winding (PROC 11)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- Styrene
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ERC 8F)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Application of chemical anchoring (PROC 3)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Use in contained batch processes [CS37]. Sewer relining operation (PROC 4)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (PROC 5)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (PROC 8A)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (PROC 8A)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. Application of chemical anchoring (indoor). (PROC 10)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) - Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an enclosed cabin or under spot ventilation. Examples are spray lamination, gelcoat spraying and “chop-hoop” filament winding (PROC 11)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
- Application of site specific biological STP sludge on agricultural soil:
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
- Application of site specific biological STP sludge on agricultural soil:
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other:
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.) (ES8)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Application of chemical anchoring (ES8)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] All open mould applications where resins is applied by brushing, rolling and other low energy spreading operations; Examples are handlamination, gelcoatbrushing, semi-continuous production of flat panels and laminates (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Equipment maintenance [CS5]; Maintenance of small items [CS18]. Equipment cleaning and maintenance, open indoor (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of floorings, mastics, coatings, castings (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Material transfers [CS3]; Pouring from small containers [CS9]. Preparation of material for application (liquids) - transfer of material from one container to another; Formulating / blending resins, gelcoats, bonding pastes, putties etc. in blending vessels (ES8)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Dipping, immersion and pouring [CS4]; Rolling, Brushing [CS51]; Roller, spreader, flow application [CS98] Application of repair putties; Application of bonding pastes / adhesives. (ES8)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Disposal of wastes [CS28]. Handling of non cured waste; Waste management / handling and storage of waste for removal for off-site treatment or for on-site treatment like incineration and/or biological waste water treatment (ES8)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Use in contained batch processes [CS37]. Sewer relining operation (ES8)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- FRP manufacturing in a professional setting, using UP/VE resins and/or formulated resins (gelcoat, bonding paste, putty etc.); Spraying [CS10]; Spraying (manually) [CS97] All open mould applications where resins is applied by manual spraying in an open work environement. Examples are spray lamination, gelcoat spraying and "chop-hoop" filament winding (ES8)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- yes
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- surface water
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Remarks:
- ERC8e Wide dispersive outdoor use of reactive substances in open systems
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- outdoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Other product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
OtherCondRepopen allclose all
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- inhalation (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
- Type of exposure:
- dermal (internal) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers v3
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 22: Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- styrene
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- styrene
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Sector of end use:
- SU 0: Other: SU 22
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 0: Other: Industrial uses.
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 0: Other: SU 3.
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 0: Other: SU 22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.