Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.

After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.

After eye contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing Seek immediate medical advice.

Fire-fighting measures

Suitable extinguishing agents
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Special hazards caused by the material, its products of combustion or resulting gases:
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
Phosphorus oxides
Hydrogen bromide (HBr)

Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.

Accidental release measures

Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation

Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.

Measures for cleaning/collecting:
Dispose contaminated material as waste according to local or national regulations.
Ensure adequate ventilation.

Handling and storage

Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires: Keep ignition sources away.

Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility:
Store away from water/moisture.
Store away from oxidizing agents.

Further information about storage conditions:
This product is hygroscopic.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
Protect from humidity and water.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average
face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace: Not required.

Personal protective equipment
General protective and hygienic measures

The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

Breathing equipment: Use suitable respirator when high concentrations are present.

Protection of hands:
Impervious gloves
Check protective gloves prior to each use for their proper condition.

Material of gloves
The selection of suitable gloves not only depends on the material, but also on quality.
Quality will vary from manufacturer to manufacturer.

Eye protection: Safety glasses

Body protection: Protective work clothing.

Stability and reactivity

Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.

Materials to be avoided:
Water/moisture
Oxidizing agents

Dangerous reactions No dangerous reactions known

Dangerous products of decomposition:
Carbon monoxide and carbon dioxide
Phosphorus oxides (e.g. P2O5)
Hydrogen bromide

Disposal considerations

Product:
Recommendation Consult state, local or national regulations to ensure proper disposal.

Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.