Registration Dossier

Administrative data

First-aid measures

First-aid measures general : If you feel unwell, seek medical advice (show the label where possible).
First-aid measures after inhalation : Remove person to fresh air and keep them warm and calm. Give oxygen or artificial respiration if necessary. Seek medical advice.
First-aid measures after skin contact : After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. Get medical advice if skin irritation persists.
First-aid measures after eye contact : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.
First-aid measures after ingestion : Do not induce vomiting. If unconscious, place in the recovery position. Never give anything by mouth to an unconscious person. Get medical advice/attention.

Symptoms/effects : Causes severe skin burns and eye damage. Asthmatic complaints.
Symptoms/effects after inhalation : Inhalation may cause irritation (cough, short breathing, difficulty in breathing).
Symptoms/effects after ingestion : Burns or irritation of the linings of the mouth, throat, and gastrointestinal tract.

Fire-fighting measures

Suitable extinguishing media : Water spray. Foam. Dry powder. Carbon dioxide. Sand.
Unsuitable extinguishing media : Use fire-extinguishing media appropriate for surrounding materials.

Accidental release measures

Do not breathe vapours. Wear full protective clothing and breathing apparatus when dealing with all spillage (see section 8). Evacuate unnecessary personnel.

Handling and storage

Precautions for safe handling : Use only outdoors or in a well-ventilated area. Avoid all eye and skin contact and do not breathe vapour and mist. Do not eat, drink or smoke when using this product.

Storage conditions : Store in original container. Keep container closed when not in use. Store in dry, cool, well-ventilated area.
Incompatible materials : Acids and acidic substances.
Storage temperature : 10 - 60 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S.
Class:
8
Classification code:
II
Packaging group:
II
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2735
Proper shipping name and description:
UN 2735 AMINES, LIQUID, CORROSIVE, N.O.S., 8, II, MARINE POLLUTANT/ENVIRONMENTALLY HAZARDOUS
Class:
8
Packaging group:
II
Marine pollutant
Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls:
Emergency eye wash fountain with clean water. Provide adequate general and local exhaust ventilation.
Hand protection:
Chemically resistant protective gloves. Butyl rubber gloves. Neoprene or nitrile rubber gloves.
Eye protection:
Chemical goggles or face shield.

Skin and body protection:
Wear suitable protective clothing. Additional foot protection: working or safety shoes (e.g. rubber or plastic boots).

Respiratory protection:
In case of inadequate ventilation wear respiratory protection.
Environmental exposure controls:
Avoid release to the environment.

Stability and reactivity

The product is non-reactive under normal conditions of use, storage and transport.
Stable under normal conditions.
No hazardous reactions known under normal conditions of use.
Light metals (Al, Zn). Strong acids, strong bases and oxidation agents.

Disposal considerations

Collect all waste in suitable and labelled containers and dispose according to local legislation.