Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 290-714-0
CAS number: 90218-39-6
A DSC measurement in an aluminium crucible with a hole showed an
exothermal effect in the temperature range of 360 – 440 °C. After the
measurement the test item was a black residue. The mass loss after the
DSC measurement amounted to 23 %. The result of the DSC measurement
is summarized in Table1.
Table1: DSC measurements
Test item /
Starting temperature /
Final test temperature /
Temperature range /
Observations after the measurement
360 – 440(exothermal)
Aluminium with a hole
Mass loss: 23%
Under consideration of the result from the DSC measurement it was
concluded that the test item had no melting point and no boiling point
at atmospheric conditions. Decomposition started at approx. 370 °C.
The test item had no melting point and no boiling point at
atmospheric conditions. Decomposition started at approx. 370 °C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again