Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 412-830-4 | CAS number: 1823-59-2 ODPA
Guidance on Safe Use
Administrative data
First-aid measures
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes;
Skin Contact: Wash the affected part with soap and water for at least 15 minutes;
Inhalation: If inhaled, remove to fresh air, and get medical attention immediately;
Ingestion: If ingested in large quantities, get medical attention immediately.
Fire-fighting measures
Flash Points: Not available
Method of Flash Points: Not available
Explosion Lower Limited: Not available
Explosion Upper Limit: Not available
Fire Extinguishing Medium: Use the medium according with the requirements of environment materials;
Special fire fighting methods: Wear self-oxygen breathing apparatus, when dealing with residual material, they should wear neoprene gloves;
Abnormal risk of fire or explosion: No special declaration of the manufacturer.
Accidental release measures
Man-made Prevention: Follow an independent preventive measures
Spilled Treatment: Wipe immediately or clean with vacuum cleaner, to prevent from the dust, and placed it in a sealed container;
Waste Treatment Methods: Place the waste in a convenient waste disposal container.
Handling and storage
Handling: Try to avoid dust generation and accumulation
Storage: Dark storage, as far as possible to reduce air exposure
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Respiratory Protection: When grinding, sanding or sawing, if the concentration of suspended particulate matter is more than permissible limits in the air, it is required to wear a NIOSH / MSHA approved air purifying respirator with a dust filter.
Ventilation Requirements: Not specified
Protection Gloves: Generally not required
Eye Protection: Glasses or safety glasses
Other protection Equipment: Not specified
Sanitation Requirements: Not specified
Stability and reactivity
Stability: Instability when heating it
Conditions Affect the Stability: No special declaration of the manufacturer.
Materials Should be Taken to Avoid Contacting with: No special declaration of the manufacturer.
Dangerous Decomposition Products: Generate toxic gases and smog at 200°C or higher
Hazardous Polymerization: Will not occur
Prevent Polymerization Conditions: Not available.
Disposal considerations
Consult and refer to the applicable regulations or authorities before disposal of waste
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
