Registration Dossier

Administrative data

First-aid measures

If inhaled:
If breathed in, move person into fresh air.
If symptoms persist, call a physician.

In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
Wash contaminated clothing before re-use.

In case of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses.
Consult a physician.

If swallowed:
If swallowed, rinse mouth with water (only if the person is con-scious).
Call a physician immediately.

Fire-fighting measures

Suitable extinguishing media:
Water mist
Dry powder
Foam
Carbon dioxide (CO2)
Sand
Aqueous film forming foam (AFFF).

Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus. Firefighters must wear fire resistant personal protective equipment.

Accidental release measures

Personal precautions:
Evacuate personnel to safe areas.
Avoid breathing dust.
Avoid dust formation.
Keep away from open flames, hot surfaces and sources of ignition.

Environmental precautions:
Should not be released into the environment.

Handling and storage

Advice on safe handling:
Ensure all equipment is electrically grounded before beginning transfer operations.
To avoid thermal decomposition, do not overheat.
Keep away from heat and sources of ignition.
Avoid formation of dust and aerosols.
Use personal protective equipment as required.

Advice on protection against fire and explosion:
Avoid dust formation.

Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.

Further information on storage conditions:
To maintain product quality, do not store in heat or direct sun-light. Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Keep away from heat and sources of ignition.

Recommended storage temperature:
15 - 25 °C

Transport information

Land transport (ADR/RID)

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated as a dangerous good
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated as a dangerous good
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure lev-els below recommended exposure limits.

Personal protective equipment
Eye protection: Safety glasses with side-shields

Hand protection
Remarks:
Nitrile rubber

Skin and body protection:
closed work clothing
Long sleeved clothing

Respiratory protection:
Engineering controls should always be the primary method of controlling exposures.
If respiratory protective equipment is needed for certain activi-ties, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances pre-sent.
Respirator with a particle filter (EN 143)
P2
Wear a self-contained breathing apparatus in all circumstanc-es when the mask and cartridge do not give adequate protec-tion (e.g. : medium confinement/insufficient oxygen/in case of large uncontrolled emissions).
Use only respiratory protection that conforms to international/ national standards.

Protective measures:
The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Stability and reactivity

Reactivity: none reasonably foreseeable

Chemical stability: stable under recommended storage conditions

Conditions to avoid:
To avoid thermal decomposition, do not overheat.
Heat, flames and sparks.

Materials to avoid: oxidizing agents

Disposal considerations

Waste treatment methods: in accordance with local and national regulations