Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 210-765-4 | CAS number: 623-03-0
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General advice
:
Move out of dangerous area.
Remove contaminated or saturated clothing.
Seek medical advice in case of symptoms caused by eye or skin contact, inhalation or swallowing.
If inhaled
:
Bring affected person outside and ensure that he/she is com-fortable.
In case of skin contact
:
Upon skin contact, wash with plenty of water and soap.
When handling hot molten mass::
Following contact with hot product, cool quickly with cold wa-ter until pain ceases. Do not remove congealed product from the skin.
Call a physician immediately.
In case of eye contact
:
Open the eyes and rinse thoroughly with plenty of water.
If swallowed
:
Rinse out mouth, spit out liquid.
Give small amounts of water to drink.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms
:
To the best of our knowledge, experiences about acute sys-temic health effects in human beings are not available.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment
:
None known
Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
:
Water spray, foam, CO2, dry powder.
Unsuitable extinguishing media
:
high volume water jet
5.2 Special hazards arising from the substance or mixture
Hazardous combustion prod-ucts
:
nitrous gases
Hydrocyanic acid (HCN)
hydrogen chloride (HCl)
Carbon oxides
Ammonia
5.3 Advice for firefighters
Special protective equipment for firefighters
:
In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
:
Wear personal protective equipment; see section 8.
Avoid dust formation.
Ensure adequate ventilation.
Dispose of ignition sources.
6.2 Environmental precautions
Environmental precautions
:
Product or extinguishing water with product must not be al-lowed to enter soil, sewers or natural bodies of water.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
:
Sweep up and shovel.
Avoid dust formation.
Melt:
Allow to solidify, use mechanical handling equipment.
Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
Handling and storage
7.1 Precautions for safe handling
Advice on safe handling
:
The substance must be handled under strictly controlled con-ditions in accordance with Article 17/18 of the REACH regula-tion.
For professional use only.
Provide sufficient ventilation and exhaust at the workplace.
Avoid dust formation.
Do not allow individual / bulk containers to stand open
Advice on protection against fire and explosion
:
If dusts develop, explosive dust/air mixtures may form. When handling hot molten mass:: Vapours can form explosive mix-tures with air. Keep away from heat and sources of ignition. Take precautionary measures against static discharges.
Hygiene measures
:
Do not breathe vapours/dust. Avoid contact with skin, eyes and clothing. Take off clothing and shoes contaminated with product. Clean before reuse. Do not eat, drink or smoke while working. Wash hands, and/or face before breaks and when workday is finished. Keep away from food, drink and animal feedingstuffs.
Dust explosion class
:
St1
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
:
K
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Additional transport information
Additional information
- Special provisions / remarks / other:
- Not dangerous according to transport regulations.
Exposure controls / personal protection
8.1 Control parameters
8.2 Exposure controls
Personal protective equipment
Eye protection
:
Safety glasses
When handling hot molten mass::
Tightly fitting safety goggles
Hand protection
Material
:
Nitrile rubber, Recommendation: Camatril 730
Break through time
:
10 min
Glove thickness
:
0,4 mm
Directive
:
4-Chlorobenzonitrile - melt (DIN EN 374)
Manufacturer
:
Kächele-Cama Latex GmbH (KCL), Germany
Material
:
Fluorinated rubber (Viton), Recommendation: Vitoject 890
Break through time
:
480 min
Glove thickness
:
0,7 mm
Directive
:
4-Chlorobenzonitrile - melt (DIN EN 374)
Manufacturer
:
Kächele-Cama Latex GmbH (KCL), Germany
Remarks
:
When handling hot material, use heat resistant gloves.
Skin and body protection
:
Protective clothing
Respiratory protection
:
Do not inhale gases, vapours, aerosols or dust - use respira-tory protection equipment.
Respirator with ABEK-P3 combination filter
Stability and reactivity
Reactivity
See section 10.3
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions
:
No hazardous reactions are known if properly handled and stored.
10.4 Conditions to avoid
Conditions to avoid
:
When handling hot molten mass::
Keep away from sources of ignition - No smoking.
10.5 Incompatible materials
Materials to avoid
:
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. see section 5
Disposal considerations
Waste treatment methods
Product
:
Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.
Contaminated packaging
:
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
