Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 695-797-0
CAS number: 93601-86-6
TGA EXPERIMENT (PRELIMINARY TEST)
Starting at 275°C, the weight of the sample decreased significantly. At
309°C, the sample weight had decreased by 25%.
After the experiment, a brown/black molten residue remained in the
sample container. The change of the colour indicated reaction and/or
decomposition of the test item.
DSC EXPERIMENT 1
An endothermic peak directly followed by an exothermic effect was
observed between 250°C and 309°C. The extrapolated onset temperature of
the endothermic peak was 275.948°C. The endothermic effect was most
likely caused by melting of the test item. The exothermic effect was
ascribed to reaction and/or decomposition of the test item. After the
experiment, a yellow/green molten residue remained in the sample
container. The change of the colour indicated reaction and/or
decomposition of the test item. Based on this visual observation, it was
concluded that the test item had molten and that the change of the
colour demonstrated reaction and/or decomposition of the test item.
DSC EXPERIMENT 2
In order to investigate the melting peak, in Experiment 2 heating was
stopped directly after the melting peak. The extrapolated onset
temperature was 275.897°C. After the experiment, a white molten residue
remained in the sample container. It demonstrated that melting and most
likely reaction and/or decomposition were the reasons for the
DSC EXPERIMENT 3
In order to investigate reaction and/or decomposition during melting, a
lower heating rate of 5°C/minute was used in the Experiment 3. The
extrapolated onset temperature was 274.566°C. Based on the shape of the
observed effects it was concluded that reaction and/or decomposition
occurred during and after melting of the test item. Since a lower
heating rate was applied, the extrapolated onset temperature was not
used for calculation of the melting temperature. After the experiment, a
yellow/green molten residue remained in the sample container.
The melting temperature was determined as the mean extrapolated
onset temperature of Experiment 1 and Experiment 2.
Differential Scanning Calorimetry (DSC) experiments were performed in a
GLP study according to EC A.1, OECD 102 and OPPTS 830.7200.
The melting temperature of the substance was determined in duplicate
obtaining a mean value of 275.9°C.
Reaction and/or decomposition of the substance started during melting.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Sellel veebilehel kasutatakse küpsiseid, et tagada lehe parim kasutus.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again