Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-545-9
CAS number: 84-61-7
In case of skin contact:
Immediately take off all contaminated clothing.
Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed
immediately with plenty of running water and possibly with soap.
Wash thoroughly the body (shower or bath).
Remove contaminated clothing immediately and dispose off safely.
In case of eye contact:
Wash immediately with water.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and label hazardous.
In case of Inhalation:
Remove casualty to fresh air and keep warm and at rest.
Most important symptoms and effects, both acute and delayed
May cause an allergic skin reaction.
Indication of any immediate medical attention and special treatment needed
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Suitable extinguishing media:
Carbon dioxide (CO2).
Extinguishing media which must not be used for safety reasons:
Do not use a solid water stream as it may scatter and spread fire.
Special hazards arising from the substance or mixture
in case of fire, the following products may be formed: Carbon monoxide; carbon dioxide. Burning produces heavy smoke.
Do not inhale explosion and combustion gases.
Advice for firefighters
Fire-fighters should wear positive pressure self-contained breathing apparatus and personal protective equipments, such as jacket
(standard: EN469), helmet (standard: EN443), gloves (standard: EN407), boots (standard: EN345-S3 HI WRU HRO).
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.
Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Remove persons to safety.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Retain contaminated washing water and dispose it.
In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Methods and material for containment and cleaning up
Suitable material for taking up: absorb with inert, absorbent material.
In case of heavy spills: wash with plenty of water.
Precautions for safe handling
Avoid contact with skin and eyes, inhaltion of vapours and mists.
Exercise the greatest care when handling or opening the container.
Don't use empty container before they have been cleaned.
Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Contamined clothing should be changed before entering eating areas.
Do not eat or drink or smoke while working.
Instructions as regards storage premises:
Adequately ventilated premises.
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
General industrial hygiene practice: Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Ensure that eyewash stations and safety showers are close to the workstation location.
Hygiene measures: When using, do not eat, drink or smoke. Take off all contaminated clothing immediately. Wash hands before breaks and immediately after handling the product.
Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.
Eye glasses with side protection (EN166).
Protection for skin:
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Protection for hands:
Butyl rubber .
Any specific glove information provided is based on published literature and glove manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves.
Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Particle filter P2.
Particle filter P3.
The use of breathing apparatus must strictly comply with the manufacturer's instructions and regulations that govern the selection and use (EN 529).
Hygienic and Technical measures
Adequate ventilation should be provided so that exposure limits are not exceeded. Do not breathe dust/fume/gas/mist/vapours/spray. Keep away from food and drink. Do not eat, drink or smoke when using this product. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking.
Reaction with oxidising agents
Stable under normal conditions.
Possibility of hazardous reactions
It may generate flammable gases on contact with elementary metals (alkalis and alkaline earth), and nitrides.
It may catch fire on contact with oxidising mineral acids, powerful oxidising agents, and powerful reducing agents.
Conditions to avoid
Heat and open flames
Hazardous decomposition products
In combustion, it can emit irritant and toxic gases
Waste treatment methods
Disposal recommendations based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.
It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste identification and disposal methods.
Empty Container Warning (where applicable): Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations.
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF WATER.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Esta web utiliza cookies para mejorar su experiencia de navegación en nuestros sitios web.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again