Brief Profile

The Brief Profile summarizes the non-confidential data on substances as it is held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The Brief Profile is automatically generated; note that it does not currently distinguish between harmonised classification and minimum classification; information requirements under different legislative frameworks may therefore not be fully up to date or complete. For accuracy reasons, substance manufacturers and imports have the responsibility to consult official sources, e.g. the electronic edition of the Official Journal of the European Union.
This Brief Profile is covered by the ECHA Legal Notice.

Substance Description

Substance identity

No image available
  • EC / List name: Beryllium
  • IUPAC name: beryllium
  • Other names
EC / List no.:
231-150-7
CAS no.:
7440-41-7
Index number:
004-001-00-7
Molecular formula:
Be
SMILES:
[Be]
InChI:
InChI=1S/Be
Type of substance:
Mono constituent substance
Origin:
Element
Registered compositions:
3
Of which contain:
0 impurities relevant for classification
0 additives relevant for classification
Substance Listed:
EINECS (European INventory of Existing Commercial chemical Substances) List

Hazard classification & labelling

Danger! According to the harmonised classification and labelling (CLP00) approved by the European Union, this substance is fatal if inhaled, is toxic if swallowed, may cause cancer by inhalation, causes damage to organs through prolonged or repeated exposure, causes serious eye irritation, causes skin irritation, may cause an allergic skin reaction and may cause respiratory irritation.

Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance may cause cancer.

Breakdown of all 282 C&L notifications submitted to ECHA

STOT RE 1 H372 Harmonised Classification
Acute Tox. 2 H330 Harmonised Classification
Acute Tox. 3 H301 Harmonised Classification
Carc. 1B H350i Harmonised Classification
Eye Irrit. 2 H319 Harmonised Classification
Skin Irrit. 2 H315 Harmonised Classification
Skin Sens. 1 H317 Harmonised Classification
STOT SE 3 H335 Harmonised Classification
Aquatic Acute 1 H400
Flam. Sol. 1 H228
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

https://echa.europa.eu/diss-blank-theme/images/cnl/graph/tick.png Harmonised Classification

https://echa.europa.eu/diss-blank-theme/images/cnl/graph/Reach.png REACH registration dossiers notifications

https://echa.europa.eu/diss-blank-theme/images/cnl/graph/CLP.png CLP notifications

Properties of concern

  • C
  • Ss

Regulatory activities

Registration, Evaluation, Authorisation & Restriction of Chemicals (REACH)

Registration
Pre-registration:
Substance pre-registered under REACH.
Registration:
This substance has 7 active registrations under REACH, 1 Joint Submission(s) and 0 Individual Submission(s).
Please see Registrants/Suppliers details.
Evaluation
Dossier Evaluation:
Substance Evaluation:
Substance included in the Community Rolling Action Plan (CoRAP).
Authorisation
Candidate List:
Annex XIV (Authorisation List):
Restriction
Annex XVII (Restriction List):

Classification Labelling & Packaging (CLP)

Harmonised C&L:
A European Union Harmonised Classification & Labelling has been assigned to this substance.
Notification:
Classification & Labelling has been notified by industry to ECHA for this substance.

Biocidal Products Regulation (BPR)

Active Substance:
Biocidal Products:

Prior Informed Consent (PIC)

Annex I:
Annex V:

European Union Observatory for Nanomaterials (EUON)

EUON:

About this substance

This substance is manufactured and/or imported in the European Economic Area in 10 - 100 tonnes per year.

This substance is used in articles, by professional workers (widespread uses), in formulation or re-packing and at industrial sites.

ECHA has no public registered data indicating whether or in which chemical products the substance might be used.

ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

This substance is used in the following activities or processes at workplace: the low energy manipulation of substances bound in materials or articles, potentially closed industrial processing with minerals/metals at elevated temperature (e.g. smelters, furnaces, refineries, coke ovens), open transfer and processing with minerals/metals at elevated temperature, high energy work-up of substances bound in materials or articles (e.g. hot rolling/forming, grinding, mechanical cutting, drilling or sanding), hot work operations with metals (e.g. welding, soldering, gouging, brazing, flame cutting) and production of mixtures or articles by tabletting, compression, extrusion or pelletisation.

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal), formulation in materials and as processing aid. Other release to the environment of this substance is likely to occur from: indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials).

This substance can be found in complex articles, with no release intended: vehicles, machinery, mechanical appliances and electrical/electronic products (e.g. computers, cameras, lamps, refrigerators, washing machines) and machinery, mechanical appliances and electrical/electronic products e.g. refrigerators, washing machines, vacuum cleaners, computers, telephones, drills, saws, smoke detectors, thermostats, radiators, large-scale stationary industrial tools). This substance can be found in products with material based on: metal (e.g. cutlery, pots, toys, jewellery).

This substance has an industrial use resulting in manufacture of another substance (use of intermediates).

This substance is used in the following areas: health services, scientific research and development and municipal supply (e.g. electricity, steam, gas, water) and sewage treatment. This substance is used for the manufacture of: metals, fabricated metal products, electrical, electronic and optical equipment and machinery and vehicles.

This substance is used in the following activities or processes at workplace: laboratory work.

Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use as processing aid.

This substance is used in the following products: metals and pH regulators and water treatment products.

This substance is used in the following activities or processes at workplace: transfer of chemicals, closed processes with no likelihood of exposure, closed, continuous processes with occasional controlled exposure, batch processing in synthesis or formulation with opportunity for exposure, mixing in open batch processes, production of mixtures or articles by tabletting, compression, extrusion or pelletisation, the low energy manipulation of substances bound in materials or articles, potentially closed industrial processing with minerals/metals at elevated temperature (e.g. smelters, furnaces, refineries, coke ovens), open transfer and processing with minerals/metals at elevated temperature, high energy work-up of substances bound in materials or articles (e.g. hot rolling/forming, grinding, mechanical cutting, drilling or sanding), hot work operations with metals (e.g. welding, soldering, gouging, brazing, flame cutting) and handling of solid inorganic substances (e.g. ores and raw metal oxides, packaging/mixing/blending and weighing of metal powders).

Release to the environment of this substance can occur from industrial use: formulation in materials, as processing aid and industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal).

This substance is used in the following products: metals and pH regulators and water treatment products. This substance has an industrial use resulting in manufacture of another substance (use of intermediates).

This substance is used in the following areas: scientific research and development, municipal supply (e.g. electricity, steam, gas, water) and sewage treatment and offshore mining. This substance is used for the manufacture of: metals, fabricated metal products, electrical, electronic and optical equipment and machinery and vehicles.

This substance is used in the following activities or processes at workplace: transfer of chemicals, the low energy manipulation of substances bound in materials or articles, laboratory work, potentially closed industrial processing with minerals/metals at elevated temperature (e.g. smelters, furnaces, refineries, coke ovens), open transfer and processing with minerals/metals at elevated temperature, high energy work-up of substances bound in materials or articles (e.g. hot rolling/forming, grinding, mechanical cutting, drilling or sanding), hot work operations with metals (e.g. welding, soldering, gouging, brazing, flame cutting), handling of solid inorganic substances (e.g. ores and raw metal oxides, packaging/mixing/blending and weighing of metal powders), closed processes with no likelihood of exposure, closed, continuous processes with occasional controlled exposure, batch processing in synthesis or formulation with opportunity for exposure, mixing in open batch processes and production of mixtures or articles by tabletting, compression, extrusion or pelletisation.

Release to the environment of this substance can occur from industrial use: as processing aid, in the production of articles, formulation in materials, industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal) and as an intermediate step in further manufacturing of another substance (use of intermediates). Other release to the environment of this substance is likely to occur from: indoor use as processing aid.

ECHA has no public registered data on the use of this substance in activities or processes at the workplace.

ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

Precautions for using this substance have been recommended by its registrants under REACH, as follows:

Prevention statements

When handling this substance: do not breathe the dust, fume, gas, mist, vapours or spray; obtain special instructions before use.

Guidance on the safe use of the substance provided by manufacturers and importers of this substance.

Registrants/suppliers

  • NGK BERYLCO FRANCE, 103 Quai Jean Pierre Fougerat CS 20017 44220 COUERON France
  • NGK BERYLCO U.K. Ltd, Unit E, Houston Park Montford Street M50 2RP Salford Greater Manchester United Kingdom
  • NGK DEUTSCHE BERYLCO GMBH, Westerbachstrasse 32 D-61476 KRONBERG IM TAUNUS Germany
  • SCHMELZMETALL DEUTSCHLAND GmbH, Raiffeisenstrasse 8 DE-97854 Steinfeld-Hausen Germany
  • TROPAG Oscar H. Ritter Nachf. GmbH, Bundesstrasse 4 20146 Hamburg Hamburg Germany
  • TROPAGES Trade & Service GmbH, Bundesstrasse 4 20146 Hamburg Hamburg Germany
  • UMCO GmbH, Georg-Wilhelm-Straße 187 21107 Hamburg Germany

Other names

Scientific properties

Physical and chemical properties

This section provides physicochemical information compiled from all automatically processable data from REACH registration dossiers that is available to ECHA at the time of generation. The quality and correctness of the information remains the responsibility of the data submitter. The Agency thus cannot guarantee the correctness of the information displayed.

Appearance/physical state / colour

Study results
  • 4 studies submitted
  • 4 studies processed
C Physical state at 20°C and 1013 hPa
Solid (100%) [4]
C Form
Not specified (75%), Compact (25%) [4]
C Odour
Odourless (100%) [1]
C Substance type
Element (100%) [4]

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence 4
Other
Data waiving
no waivers
C Summaries
  • 1 summary submitted
  • 1 summary processed
Physical state at 20°C and 1013 hPa
Solid (100%)

Melting/freezing point

Study results
  • 3 studies submitted
  • 1 study processed
R Melting / freezing point
1 278 °C [1]

Type of Study provided
Studies with data
Key study 1
Supporting study 2
Weight of evidence
Other
Data waiving
no waivers
R Summaries
  • 1 summary submitted
  • 1 summary processed
Melting / freezing point at 101 325 Pa
1 278 °C

Boiling point

Study results
  • 2 studies submitted
  • 1 study processed
R Boiling point
2 471 °C @ 101.325 kPa [1]

Type of Study provided
Studies with data
Key study 1
Supporting study 1
Weight of evidence
Other
Data waiving
no waivers
R Summaries
  • 1 summary submitted
  • 1 summary processed
Boiling point at 101 325 Pa
2 471 °C

Density

Study results
  • 3 studies submitted
  • 3 studies processed
R Relative density
1.848 - 1.85 @ 20 °C [3]

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence 3
Other
Data waiving
no waivers
R Summaries
  • 1 summary submitted
  • 1 summary processed
Relative density at 20°C
1.85

Vapour pressure

Study results
  • 1 study submitted
  • 1 study processed
R Vapour pressure
13.332 hPa @ 1 860 °C [1]

Type of Study provided
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Partition coefficient

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Water solubility

Study results
  • 1 study submitted
  • 1 study processed
R Water solubility (mass/vol.)
500 ng/L @ 20 °C and pH 6.11 [1]

Type of Study provided
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Solubility in organic solvents / fat solubility

Data not provided by the registrant

Surface tension

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Flash point

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Auto flammability

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Flammability

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Explosiveness

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Oxidising

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Oxidation reduction potential

Data not provided by the registrant

pH

Data not provided by the registrant

Dissociation constant

Data not provided by the registrant

Viscosity

Data not provided by the registrant

Environmental fate and pathways

This section provides environmental fate and pathways information compiled from all automatically processable data from REACH registration dossiers that is available to ECHA at the time of generation. The quality and correctness of the information remains the responsibility of the data submitter. The Agency thus cannot guarantee the correctness of the information displayed.

Phototransformation in air

Data not provided by the registrant

Hydrolysis

Data not provided by the registrant

Phototransformation in water

Data not provided by the registrant

Phototransformation in soil

Data not provided by the registrant

Biodegradation in water - screening tests

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Biodegradation in water & sediment - simulation tests

Data not provided by the registrant

Biodegradation in soil

Data not provided by the registrant

Bioaccumulation: aquatic / sediment

Data not provided by the registrant

Bioaccumulation: terrestrial

Data not provided by the registrant

Adsorption/desorption

Data not provided by the registrant

Henrys law constant (H)

Data not provided by the registrant

Distribution modelling

Data not provided by the registrant

Ecotoxicological information

This section provides ecotoxicological information compiled from all automatically processable data from REACH registration dossiers that is available to ECHA at the time of generation. The quality and correctness of the information remains the responsibility of the data submitter. The Agency thus cannot guarantee the correctness of the information displayed.

Predicted No-Effect Concentration (PNEC)

Data not provided by the registrant

Short–term toxicity to fish

Data not provided by the registrant

Long–term toxicity to fish

Data not provided by the registrant

Short–term toxicity to aquatic invertebrates

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Long–term toxicity to aquatic invertebrates

Data not provided by the registrant

Toxicity to aquatic algae and cyanobacteria

Study results
  • 1 study submitted
  • 0 studies processed

No automatically processable data submitted

Type of Study provided
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Summaries
  • 0 summaries submitted
  • 0 summaries processed

No data available

Toxicity to aquatic plants other than algae

Data not provided by the registrant

Toxicity to microorganisms

Data not provided by the registrant

Sediment toxicity

Data not provided by the registrant

Endocrine disrupter testing in aquatic vertebrates – in vivo

Data not provided by the registrant

Toxicity to terrestrial macroorganisms except arthropods

Data not provided by the registrant

Toxicity to terrestrial arthropods

Data not provided by the registrant

Toxicity to terrestrial plants

Data not provided by the registrant

Toxicity to soil microorganisms

Data not provided by the registrant

Toxicity to birds

Data not provided by the registrant

Toxicity to mammals

Data not provided by the registrant

Toxicological information

This section provides toxicological information compiled from all automatically processable data from REACH registration dossiers that is available to ECHA at the time of generation. The quality and correctness of the information remains the responsibility of the data submitter. The Agency thus cannot guarantee the correctness of the information displayed.

Derived No- or Minimal Effect Level (DN(M)EL)

M/C Summaries
  • 1 summary submitted
  • 1 summary processed

The derived no- or minimum effect level (DN(M)EL) is the level of exposure above which a human should not be exposed to a substance. Please note that when more than one summary is provided, DN(M)EL values may refer to constituents of the substance and not to the substance as a whole. More detailed information is available in the dossiers.

Data for WORKERS
INHALATION Exposure Threshold Most sensitive study
Systemic Effects
Long-term: Other toxicological threshold
Acute /short term: - -
Local Effects
Long-term: - -
Acute /short term: - -
DERMAL Exposure Threshold Most sensitive study
Systemic Effects
Long-term: - -
Acute /short term: - -
Local Effects
Long-term: - -
Acute /short term: - -
EYE Exposure
-
Data for the GENERAL POPULATION
INHALATION Exposure Threshold Most sensitive study
Systemic Effects
Long-term: - -
Acute /short term: - -
Local Effects
Long-term: - -
Acute /short term: - -
DERMAL Exposure Threshold Most sensitive study
Systemic Effects
Long-term: - -
Acute /short term: - -
Local Effects
Long-term: - -
Acute /short term: - -
ORAL Exposure Threshold Most sensitive study
Systemic Effects
Long-term: - -
Acute /short term: - -
EYE Exposure
-

Toxicokinetics, metabolism, and distribution

Study results
Study data: basic toxicokinetics
  • 3 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Study data: basic toxicokinetics
Studies with data
Key study 1
Supporting study 2
Weight of evidence
Other
Data waiving
no waivers
Study data: dermal absorption
  • 0 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Study data: dermal absorption
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Acute toxicity

Study results
oral
  • 1 study submitted
  • 1 study processed
P/RResults
LD50 2 000 mg/kg bw (rat) [1]
M/CInterpretations of results
Not classified [1]

Type of Study provided
oral
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
no waivers
inhalation
  • 6 studies submitted
  • 0 studies processed

No automatically processable data submitted

inhalation
Studies with data
Key study 1
Supporting study 5
Weight of evidence
Other
Data waiving
no waivers
dermal
  • 0 studies submitted
  • 0 studies processed

No data available

dermal
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
other routes
  • 2 studies submitted
  • 0 studies processed

No automatically processable data submitted

other routes
Studies with data
Key study
Supporting study 2
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Irritation / corrosion

Study results
Study data: skin
  • 3 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Study data: skin
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 2
Exposure cons.
Other
Study data: eye
  • 2 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Study data: eye
Studies with data
Key study 1
Supporting study
Weight of evidence
Other
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
M/C Summaries
  • 1 summary submitted
  • 1 summary processed
Skin
No adverse effect observed (not irritating)
Eye
No adverse effect observed (not irritating)

Sensitisation

Study results
Study data: skin
  • 5 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Study data: skin
Studies with data
Key study 1
Supporting study 2
Weight of evidence
Other 1
Data waiving
Not feasible
Sci. unjustified 1
Exposure cons.
Other
Study data: respiratory
  • 0 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Study data: respiratory
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
M/C Summaries
  • 1 summary submitted
  • 1 summary processed
Skin sensitisation
No adverse effect observed (not sensitising)
Respiratory sensitisation
No adverse effect observed (not sensitising)

Repeated dose toxicity

Study results
Study data: oral
  • 0 studies submitted
  • 0 studies processed

No data available

Type of Study provided
Study data: oral
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Study data: inhalation
  • 4 studies submitted
  • 0 studies processed

No automatically processable data submitted

Study data: inhalation
Studies with data
Key study
Supporting study 4
Weight of evidence
Other
Data waiving
no waivers
Study data: dermal
  • 0 studies submitted
  • 0 studies processed

No data available

Study data: dermal
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Genetic toxicity

Study results
Study data: in vitro
  • 5 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Study data: in vitro
Studies with data
Key study 5
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Study data: in vivo
  • 0 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Study data: in vivo
Studies with data
Key study
Supporting study
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Carcinogenicity

Study results
  • 11 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Studies with data
Key study
Supporting study 5 3
Weight of evidence 3
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Toxicity to reproduction

Data not provided by the registrant

Neurotoxicity

Data not provided by the registrant

Immunotoxicity

Study results
  • 2 studies submitted
  • 0 studies processed

Study data not processed for brief profile

Type of Study provided
Studies with data
Key study
Supporting study 1 1
Weight of evidence
Other
Data waiving
no waivers
Summaries
  • 1 summary submitted
  • 0 summaries processed

No automatically processable data submitted

Endocrine disrupter mammalian screening - in vivo

Data not provided by the registrant