Registration Dossier

Administrative data

First-aid measures

Eyes: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Skin: Wash off immediately with soap and plenty of water. Get medical attention if irritation occurs.
Inhalation: Remove to fresh air, if not breathing give artificial respiration. If breathing is difficult, give oxygen and get immediate medical attention.
Ingestion: Do not induce vomiting. If vomiting occurs naturally, have casualty lean forward to reduce the risk of aspiration. Seek medical attention immediately.

Fire-fighting measures

Fire Fighting Measures: Standard procedure for chemical fires.
Suitable Extinguishing Media: Carbon dioxide, dry chemical, foam or water mist.
Fire Fighting Equipment: Wear self-contained breathing apparatus and protective suit.
Unusual hazards: The product can form an explosive dust/air mixture. For further information, see Section 7 Explosion Hazards.
Hazardous Combustion Products: Burning may produce toxic combustion products.

Accidental release measures

Cleanup Instructions: Sweep up and shovel into suitable containers for disposal. Avoid dust formation.
Wear suitable protective equipment. Should not be released into the environment.

Handling and storage

Handling: As with all industrial chemicals, use good industrial practices when handling. Avoid eye, skin, and clothing contact. Do not inhale. Do not taste or swallow. Use only with adequate ventilation.
Storage: Keep containers tightly closed in a cool, well-ventilated place.

Explosion Hazards: - Combustible powder.
- Avoid creating dusty conditions.
- Grounding is required when emptying into a conductive container.
- When flammable solvents are present, the container must be inerted or the system otherwise designed to prevent or contain an explosion. Seek expert advice.
In addition, for products packaged in fused-lined (coated) fiber drums, fiber drums with conductive liners, steel drums, steel pails, and Type "C" FIBC (bulk bags), or other conductive the following instructions also apply:
- Always ground this package before emptying.
The user is responsible for designing the system to handle solid and ensuring proper training of employees in the system's use.
For Industrial Use Only

Transport information

Land transport (ADR/RID)

UN number:
Not regulated for this mode of transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated for this mode of transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated for this mode of transport.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated for this mode of transport.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure Guidelines:
There are no OSHA or ACGIH exposure guidelines available for component(s) in this product.
Personal Protective Equipment
Eye/Face Protection: Wear safety glasses or goggles to protect against dust particles.
Skin Protection: Wear chemical resistant gloves and protective clothing.
Respiratory Protection: Use NIOSH approved respirator as needed to mitigate exposure.
Engineering Controls: Work in well ventilated areas. Do not breathe dust.

Stability and reactivity

Stability: Stable.
Conditions to Avoid: Avoid static discharge.
Incompatibility: Strong oxidizing agents, strong acids, strong bases.
Hazardous Decomposition Products: No decomposition expected under normal storage conditions.
Possibility of Hazardous Reactions: None expected.

Disposal considerations

Waste Disposal: Dispose in accordance with local, state, provincial and federal regulations.