Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information
In case of persisting adverse effects, consult a physician. Change contaminated, saturated clothing.
After inhalation
Remove affected person from the immediate area. Ensure supply of fresh air.
After skin contact
Wash off immediately with soap and water.
After eye contact
Separate eyelids, wash the eyes thoroughly with water (15 min.). Get medical attention if pain still persists.
After ingestion
Seek medical advice immediately. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person

Most important symptoms and effects, both acute and delayed
No data available.
Indication of any immediate medical attention and special treatment needed
No data available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Foam; Carbon dioxide; Extinguishing powder; Water spray jet
Unsuitable extinguishing media
No data available.
Special hazards arising from the substance or mixture
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Combustion products of this material have to be classed invariably as respiratory poison.
Advice for firefighters
Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done with breathing apparatus. Wear protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
Refer to protective measures listed in sections 7 and 8.
For emergency responders
No data available. Personal protective equipment (PPE) - see Section 8.

Environmental precautions
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.

Methods and material for containment and cleaning up
Take up with absorbent material (e.g., sand, kieselguhr, universal binder). When picked up, treat material as prescribed under heading "Disposal considerations".

Reference to other sections
No data available.

Handling and storage

Precautions for safe handling
Advice on safe handling
No special measures necessary if stored and handled as prescribed. Provide good ventilation of working area (local exhaust ventilation, if necessary). Avoid eye, skin and clothing contact.
General protective and hygiene measures
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Avoid contact with eyes and skin. Wash hands before breaks and after work. Remove soiled or soaked clothing immediately. Do not inhale vapours.
Advice on protection against fire and explosion
Keep away from sources of heat and ignition.

Conditions for safe storage, including any incompatibilities
Technical measures and storage conditions
Keep container tightly closed in a cool, well-ventilated place.
Requirements for storage rooms and vessels
Containers which are opened must be carefully closed and kept upright to prevent leakage. Store in original packing at room temperature.
Advice on storage assembly
None known

Specific end use(s)
use as an intermediate

Transport information

Land transport (ADR/RID)

UN number:
UN3082
Shippingopen allclose all
Class:
9
Classification code:
M6
Packaging group:
III
Labels:
9
Symbol "fish and tree"
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN3082
Shippingopen allclose all
Class:
9
Classification code:
M6
Packaging group:
III
Labels:
9
Symbol "fish and tree"
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S
Chemical name:
4-Isobutylbenzaldehyde
Class:
9
Packaging group:
III
EmS code:
F-A+S-F
Labels:
9
Symbol "fish and tree"
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3082
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s
Chemical name:
4-Isobutylbenzaldehyde
Class:
9
Packaging group:
III
Labels:
9
Symbol "fish and tree"
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
No parameters available for monitoring.

Exposure controls
Appropriate engineering controls
No data available.
Personal protective equipment
Respiratory protection
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Eye / face protection
Safety glasses (EN 166)
Hand protection
In case of intensive contact, wear protective gloves (EN 374). Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Other
Normal chemical work clothing.
Environmental exposure controls
No data available.
In case of incidential spillages, the usual precautions while handling chemicals shall be taken. Avoid the contact with eyes, skin and clothing. Avoid inhalation or swallowing of the substance. When handling the substance, wear personal protective equipment (safety goggles, impermeable gloves, protective clothing).

Stability and reactivity

Reactivity
No data available.

Chemical stability
No data available.

Possibility of hazardous reactions
No data available.

Conditions to avoid
None, if handled according to order.

Incompatible materials
None known.

Hazardous decomposition products
No hazardous decomposition products known.

Disposal considerations

Waste treatment methods
Product
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Packaging
Residuals must be removed from packaging and when emptied completely disposed of in accordance with the regulations for waste removal. Incompletely emptied packaging must be disposed of in the form of disposal specified by the regional disposer.