Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-517-7 | CAS number: 141-98-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- (Q)SAR
- Adequacy of study:
- weight of evidence
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
- Justification for type of information:
- QSAR prediction:US EPA accepted QSAR method for chemicals properties assessment.
- Qualifier:
- according to guideline
- Guideline:
- other: QSAR model
- Principles of method if other than guideline:
- ECOSAR Program(v1.00)
- GLP compliance:
- no
- Analytical monitoring:
- no
- Vehicle:
- no
- Test organisms (species):
- other: QSAR model
- Details on test organisms:
- not applicable. QSAR model
- Test type:
- other: QSAR model
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 30 d
- Test temperature:
- not applicable. QSAR model
- pH:
- not applicable. QSAR model
- Dissolved oxygen:
- not applicable. QSAR model
- Salinity:
- not applicable. QSAR model
- Nominal and measured concentrations:
- not applicable. QSAR model
- Details on test conditions:
- SMILES : O(C(=NCC)S)C(C)C
CHEM : Carbamothioic acid, ethyl-, O-(1-methylethyl) ester
CAS Number: 141-98-0
MOL FOR: C6 H13 N1 O1 S1
MOL WT : 147.24
Log Kow: 3.32 (KowWin estimate)
Wat Sol: 114.4 mg/L (WskowWin estimate) - Reference substance (positive control):
- no
- Duration:
- 96 h
- Dose descriptor:
- EC50
- Effect conc.:
- 4.529 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- not specified
- Basis for effect:
- not specified
- Duration:
- 30 d
- Dose descriptor:
- NOEC
- Effect conc.:
- 2.156 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- not specified
- Basis for effect:
- not specified
- Remarks on result:
- other: NOEC cited as a ChV value
- Details on results:
- Green Algae, 96-hr EC50 =4.529 mg/L (ppm)
Green Algae, 30-day, NOEC cited as a ChV value = 2.156 mg/L(ppm) - Validity criteria fulfilled:
- yes
- Remarks:
- method for chemicals properties assessment.
- Conclusions:
- Green Algae, 96-hr EC50 = 4.529 mg/L (ppm)
Green Algae, 30-day, NOEC cited as a ChV value = 2.156 mg/L(ppm) - Executive summary:
The ECOSAR QSAR model predicts that 30-day, NOEC cited as a ChV value would to be 2.156 mg/L (ppm) Green Algae.
The ECOSAR QSAR model predicts that 96-hr EC50 value would to be 4.529 mg/L (ppm) for Green Algae.
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- weight of evidence
- Study period:
- 1980
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
- Justification for type of information:
- Propan-2-ol (Isopropyl alcohol) is both reagents used in the manufacture of IPETC/O-isopropyl ethylthiocarbamate . Therefore, Propan-2-ol (Isopropyl alcohol) need to be considered in the assessment of IPETC/O-isopropyl ethylthiocarbamate .
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- The concentration of the algal suspension is measured turbidimetrically and expressed by the extinction of the primary light of the monochromatic radiation at 578 nm for a layer of 10 mm thickness. The concentration at which the inhibitory action of the test material begins is present in that dilution from a series of dilutions of the test material having, at the end of the test period, a mean extinction value that is ≥ 3% below the mean value of the extinction value for non-toxic dilutions of the test cultures.
- GLP compliance:
- no
- Analytical monitoring:
- no
- Vehicle:
- no
- Details on test solutions:
- Before preparing the test cultures neutralize the test material solution having a known content in sterile double-distilled water to be tested by using the minimum volume of acid or alkaline solution.
From this test material solution, prepare dilutions with varying volume ratios using sterile double-distilled water. These dilutions each contain 1 part v/v of test material solution in 2E0 to 2E14 parts v/v mixture. When preparing the two parallel dilution series in 300-ml Erlenmeyer flasks proceed as follows: the first flask of each dilution series contains 80 ml of test material solution at the start. Starting from this flask, prepare subsequent dilutions using a constant dilution ratio of 40 ml preliminary test material dilution + 40 ml double-distilled water. So each flask will first contain 40 ml liquid.
Then, complete each flask from the dilution series to be inoculated to the rated value of 50 ml by adding 5 ml each of stock solution I and 5 ml each of the algal suspension of the preliminary culture having a known adjusted extinction value. - Test organisms (species):
- Scenedesmus quadricauda
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 7 d
- Hardness:
- not reported
- Test temperature:
- 27ºC
- pH:
- not reported
- Dissolved oxygen:
- not reported
- Salinity:
- freshwater
- Nominal and measured concentrations:
- 2E0 to 2E14 parts v/v mixtures
- Details on test conditions:
- Following inoculation, the extinction value of the monochromatic radiation at 578 nm for a 10-mm layer of the algal suspension of the test cultures will correspond to the extinction value of the Formazin standard suspension TE/F/578 nm = 20.
While shaking the contents, transfer from each flask of the inoculated dilution series 10 ml into three Kapsenberg culture tubes (18 x 180 mm), from each flask of the non-inoculated dilution series into one Kapsenberg tube each and stopper culture tubes with metal caps. Keep the filled culture tubes from the dilution series on a white surface protected against daylight and exposed to constant lighting by luminescent warm white tubes at 60 cm distance from each other, at 27ºC and a relative humidity of 50% for 7 days and shake once each day.
Measure the extinction of the monochromatic radiation at 578 mm in a 10-mm layer of the cell suspension from each test culture.
Nutrient solution 1 (for stock and preliminary cultures)
Dissolve in double-distilled water:
496 mg sodium nitrate, NaNO3
39 mg dipotassium hydrogen phosphate, K2HPO4 anhydrous
75 mg magnesium sulphate, MgSO4.7 H2O
36 mg calcium chloride, CaCl2.2 H2O
40 mg sodium metasilicate, Na2SiO3
58 mg sodium carbonate Na2CO3, anhydrous
3 mg citric acid C6H8O7.H2O
3 mg iron (III) citrate C6H5FeO7.5 H2O
10 mg disodium salt of ethylene diamine tetracetic acid, C10H14N2Na2O8.2 H2O
Add 10 ml of the trace elements operating solution, complete to 1 litre with double-distilled water and adjust pH to 7.0 using the minimum of Na2CO3 solution.
Stock solution I (for test cultures)
Dissolve in double-distilled water:
248 mg sodium nitrate, NaNO3
19.5 mg disodium hydrogen phosphate, K2HPO4, anhydrous
750 mg magnesium sulphate, MgSO4.7 H2O
360 mg calcium chloride, CaCl2.2 H2O
30 mg iron (III) citrate C6H5FeO7.5 H2O.
Add 10 ml of the trace elements operating solution, complete to 1 liter with double -distilled water and adjust pH to 7.0 using the minimum of Na2CO3 solution.
Stock solution II (trace elements)
Dissolve in double-distilled water:
2.86 g boric acid, H3BO3
1.81 g manganese (II) chloride, MnCl2 . 4 H2O
220 mg zinc sulphate, ZnSO4.7 H2O
80 mg copper (II) sulphate, CuSO4.5 H2O
24 mg sodium molybdate, Na2MoO4.2 H2O
40 mg cobalt (II) chloride, CoCl2.6 H2O
Complete solution with double distilled water to 1 liter in a volumetric flask.
Operating solution of trace elements
Complete 4 ml of stock solution II with double-distilled water to 100 ml in a volumetric flask. - Reference substance (positive control):
- no
- Duration:
- 7 d
- Dose descriptor:
- other: Toxicity threshold
- Effect conc.:
- 1 800 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- growth rate
- Remarks on result:
- other: Toxicity threshold concentration = 1800 mg/l.
- Details on results:
- For evalution of the toxicological findings at the end of the test period, the mean value (A) of the extinction is calculated for all test cultures that are free from both toxic influence and stimulation of growth except for those having extinction values outside a standard deviation of <3% and also, the mean value (B) of the extinction for those test cultures having the lowest toxic test material concentration within the dilution series.
For mathematical evaluation, (a) (highest non-toxic test material concentration) is plotted against (A) and (b) (lowest toxic test material concentration) against (B) as coordinates. After having entered (A - 3%), the test material concentration at which the inhibitory action (c) begins may be obtained from the regression line between (a;A) and (b;B) if a negative deviation of the mean extinction by a 3% difference against the mean extinction value of all test cultures having a non-toxic and non-stimulating test material concentration is used as an indicator of the beginning of inhibitory action. - Validity criteria fulfilled:
- not specified
- Conclusions:
- A 7 d Toxicity threshold concentration of 1800 mg/l has been determined for growth rate effects to Scenedesmus quadricauda of the test substance.
Propan-2-ol (Isopropyl alcohol) is both reagents used in the manufacture of Reaction mass of O-isopropyl ethylthiocarbamate and n-butanol and propan-2-ol. Therefore, Propan-2-ol (Isopropyl alcohol) need to be considered in the assessment of IPETC/ O-isopropyl ethylthiocarbamate . - Executive summary:
A 7 d Toxicity threshold concentration of 1800 mg/l has been determined for growth rate effects to Scenedesmus quadricauda of the test substance.Propan-2-ol (Isopropyl alcohol) is both reagents used in the manufacture of IPETC/ O-isopropyl ethylthiocarbamateand.Therefore, Propan-2-ol (Isopropyl alcohol) need to be considered in the assessment of IPETC/O-isopropyl ethylthiocarbamate .
Referenceopen allclose all
Overview of QSARs estimations onaquatic toxicity of O-isopropyl ethylthiocarbamate (IPETC ) Green algae
Method
|
Results |
Remarks |
Reference |
QSAR estimate |
Green Algae, 96-hr EC50 =4.529 mg/L (ppm) Green Algae, 30-day, NOEC cited as a ChV value = 2.156 mg/L(ppm)
|
Reliable with restrictions, QSAR estimated data |
ECOSAR Program (v1.00) |
Green Algae, 96-hr EC50 =4.529 mg/L (ppm)
Green Algae, 30-day, NOEC cited as a ChV value = 2.156 mg/L(ppm)
Description of key information
The ECOSAR QSAR model predicts that 30-day, NOEC cited as a ChV value would to be 2.156 mg/L (ppm) Green Algae.
The ECOSAR QSAR model predicts that 96-hr EC50 value would to be 4.529 mg/L (ppm) for Green Algae.
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 4.529 mg/L
- EC50 for marine water algae:
- 2.156 mg/L
- EC10 or NOEC for freshwater algae:
- 0.453 mg/L
- EC10 or NOEC for marine water algae:
- 0.216 mg/L
Additional information
The ECOSAR QSAR model predicts that 30-day, NOEC cited as a ChV value would to be 2.156 mg/L (ppm) Green Algae.
The ECOSAR QSAR model predicts that 96-hr EC50 value would to be 4.529 mg/L (ppm) for Green Algae.
A 7 d Toxicity threshold concentration of 1800 mg/l has been determined for growth rate effects to Scenedesmus quadricauda of the test substance.Propan-2-ol (Isopropyl alcohol) is both reagents used in the manufacture of IPETC/O-isopropyl ethylthiocarbamate. Therefore, Propan-2-ol (Isopropyl alcohol) need to be considered in the assessment of IPETC/O-isopropyl ethylthiocarbamate.
The available data for saltwater algae and cyanobacteria are limited and to obtaine the value for PNECs for saltwaters is taken account a assesment factor 10 to extrapolate to LC50 following the “Guidance on Information Requirement and Chemical Safety Assessment R.10: Characterisation of dose [concentration]- response for environment”and “Table R.10-5 Assessment factors proposed for deriving PNEC water for saltwater for different data sets”, to account for the possibility that greater taxonomic diversity in the marine environment makes it likely that some marine taxa may be more sensitive than the most sensitive freshwater taxa
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.