Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

vapour pressure
Type of information:
calculation (if not (Q)SAR)
estimated by calculation
Adequacy of study:
key study
Study period:
17DEC2009 - 05FEB2010
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study with acceptable restrictions
Reason / purpose for cross-reference:
reference to other study
according to guideline
EU Method A.4 (Vapour Pressure)
according to guideline
OECD Guideline 104 (Vapour Pressure Curve)
Version / remarks:
GLP compliance:
Type of method:
other: estimation method: Grain Watson correlation
Key result
20 °C
Vapour pressure:
<= 0.16 Pa
Remarks on result:
other: <= 1.6E-3 mbar

The experimentally determined vapour pressure of the test item C-SAT 090103 at 20 °C of 2.2E-27 mbar (see attached DSC-diagram and vapour pressure diagram) is not in the recommended range of 1 to 1000 mbar for DSC-measurements.

The vapour pressure of the substance is estimated to be <= 0.16 Pa at 20°C, by using the Grain-Watson estimation, in accordance with EC A.4 and OECD 104 guidelines.

Description of key information

The vapour pressure of the substance was estimated to be <= 0.16 Pa at 20°C.

Key value for chemical safety assessment

Additional information

Key value for chemical safety assessment (human health): < 0.01 Pa at 20°C

Key value for chemical safety assessment (environment): 0.005 Pa at 20°C

The vapour pressure of the substance was estimated to be <=0.16 Pa at 20°C, using the Grain-Watson estimation method. The decomposition temperature (593.2 K) was used as input parameter for the boiling point and hence the calculated vapour pressure is an overestimation of the real vapour pressure.

The substance is a UVCB substance, containing structurally related molecules with a relatively broad molecular weight range, thus testing is not considered appropriate. The result would very likely reflect the vapour pressure of the most volatile constituent, which may not be representative for the substances as a whole.

For the human health part of the CSA of the substance, it is considered appropriate to use a vapour pressure < 0.01 Pa. With this vapour pressure, the saturated vapour concentration replaces the conservative ECETOC TRA estimations. Using higher estimations is not considered needed for this viscous liquid containing very large molecules. For the environmental part of the CSA, a vapour pressure of 0.005 Pa is used (as a defined value is needed for this CSA).