Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 234-846-9 | CAS number: 12036-35-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 28 September 2018 - 6 December 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 019
- Report date:
- 2019
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- adopted 09 October 2017
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Version / remarks:
- Commission Regulation (EU) No. 2017/735 of 14 February 2017 amending Regulation (EC) No. 440/2008; EC method B.47: Bovine Corneal Opacity and Permeability Test Method for Identifying Ocular Corrosives and Severe Irritants
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Dirhodium trioxide
- EC Number:
- 234-846-9
- EC Name:
- Dirhodium trioxide
- Cas Number:
- 12036-35-0
- Molecular formula:
- Rh2O3
- IUPAC Name:
- Rhodium(III)oxide
- Details on test material:
- Dirhodium trisoxide
Constituent 1
- Specific details on test material used for the study:
- 100% Rh2O3x0.67 H2O or 95.5% Rh2O3 (based on Rh content of 77.4 wt%)
Test animals / tissue source
- Species:
- other: Bovine eyes from cattle
- Strain:
- not specified
- Details on test animals or tissues and environmental conditions:
- Source of eyes: Eyes from cattle in the age range of 6 to 12 months were obtained from a slaughterhouse. To minimize deterioration and bacterial contamination, on collection the eyes were completely submerged in Hanks’ Balanced Salt Solution (HBSS) containing penicillin at 100 IU/mL and streptomycin at 100 µg/mL.
Upon arrival at the laboratory, the eyes were examined for defects such as but not limited to increased opacity, scratches, and neovascularisation. Only corneas from eyes free of defects were used.
Test system
- Vehicle:
- physiological saline
- Remarks:
- The test item was suspension suspended in a 0.9% sodium chloride solution
- Controls:
- yes, concurrent vehicle
- yes, concurrent positive control
- Amount / concentration applied:
- The test item was suspension suspended in a 0.9% sodium chloride solution with a final concentration of 20% (w/v). Dirhodium trioxide was thoroughly agitated on a whirl mixer and promptly administered to the cornea.
750 µL of the test or control items were added to completely cover the cornea’s epithelium in the anterior chamber. - Duration of treatment / exposure:
- 240 minutes (recommended exposure time for non-surfactant solids)
- Observation period (in vivo):
- Not applicable
- Duration of post- treatment incubation (in vitro):
- 2 hours
- Number of animals or in vitro replicates:
- Not applicable
- Details on study design:
- SELECTION AND PREPARATION OF CORNEAS: Only corneas from eyes free of defects were used. Corneas that had opacity greater than seven opacity units or equivalent for the opacitometer and cornea holders used after an initial one hour equilibration period had to be discarded. The corneas were dissected with a 2 to 3 mm rim of sclera and mounted in corneal holders with anterior (epithelium) and posterior (endothelium) chambers.Beginning with the posterior chambers, the chambers were filled to excess with pre-warmed Eagle’s Minimum Essential Medium (EMEM) , while preventing bubble formation. The corneal holder was equilibrated at 32 °C ± 1 °C for at least one hour.
QUALITY CHECK OF THE ISOLATED CORNEAS: After the equilibration period, fresh pre-warmed EMEM was added to both chambers and baseline opacity readings were taken for each cornea. Corneas exhibiting macroscopic tissue damage (e.g. scratches, pigmentation, neovascularisation) or an opacity >7 opacity units were discarded. The mean opacity of all equilibrated corneas was calculated by use of an opacitometer. A minimum of three corneaswith opacity values close to the median value for all corneas were selected as negative control corneas. The remaining corneas were then distributed into treatment, solvent and positive control groups (three corneas/group).
NUMBER OF REPLICATES: 3
NEGATIVE CONTROL USED: 0.9% sodium chloride solution
POSITIVE CONTROL USED: 20% Imidazole (CAS no. 288-32-4) in 0.9% sodium chloride solution
TREATMENT METHOD: open-chamber method, 240 minutes exposure period
POST-INCUBATION PERIOD: no
REMOVAL OF TEST SUBSTANCE
- Number of washing steps after exposure period: After the exposure period the epithelium was washed with EMEM containing phenol red at least three times. Washing was repeated until no test item or discolouration (yellow or purple) of phenol red was visible. The corneas were rinsed a final time with EMEM only to remove any remaining phenol red from the chamber. After rinsing, the glass window was replaced on the anterior chamber to recreate a closed system and the chamber was filled with EMEM without phenol red.
- POST-EXPOSURE INCUBATION: not applicable
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity: Corneal opacity was determined by the amount of light transmission through the cornea measured quantitatively with the aid of an opacitometer resulting in opacity values measured on a continuous scale.
- Corneal permeability: 1 mL sodium fluorescein solution (5 mg/mL in 0.9% sodium chloride solution) was added to the anterior chamber (epithelial surface) while the posterior chamber (endothelial surface) was refilled with fresh EMEM. The holder was incubated in a horizontal position at 32 ± 1 °C for 90 ± 5 minutes. The amount of sodium fluorescein that crossed from the anterior to the posterior chamber was measured quantitatively using a microplate reader. Measurements at 490 nm were recorded as optical density (OD490). The fluorescein permeability values were determined using OD490 values based upon a visible light spectrophotometer using a standard 1 cm path length.
- Others (e.g, pertinent visual observations, histopathology): Corneal injury was assessed by evaluating the opacity and permeability of the cornea.
SCORING SYSTEM: After correcting the opacity and mean permeability (OD490) values for background opacity and the negative control permeability OD490 values, the mean opacity, and permeability OD490 values for each treatment group were combined in an empirically-derived formula to calculate an in vitro irritancy score (IVIS) for each treatment group as follows:
IVIS = mean opacity value + (15 x mean permeability OD490 value)
The opacity and permeability values were also evaluated independently to determine whether the test item induced corrosivity or severe irritation through only one of the two endpoints.
DECISION CRITERIA: The IVIS cut-off values for identifying test chemicals as inducing serious damage (UN GHS Category 1) and test chemicals not requiring classification for irritation or serious eye damage (UN GHS No Category) are given hereafter.
IVIS UN GHS
≤ 3 No Category
>3 and ≤55 No prediction can be made
> 55 Category 1
Results and discussion
In vitro
Results
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- Mean
- Value:
- 1.814
- Vehicle controls validity:
- valid
- Remarks:
- IVIS score 0.9% NaCl = 0.806 (SD = 0.491)
- Positive controls validity:
- valid
- Remarks:
- IVIS score 20% Imidazol = 97.538 (SD = 5.300)
- Remarks on result:
- no indication of irritation
- Remarks:
- The calculated IVIS of 1.814 ± 1.314 is below the cut-off value of 3 (UN GHS no category) and consequently the test item is not classified as a severe irritant and is not corrosive according to UN GHS classification.
- Other effects / acceptance of results:
- ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: yes
- Acceptance criteria met for positive control: yes
- Range of historical values if different from the ones specified in the test guideline: see Table 1
Any other information on results incl. tables
The corneas treated with the negative control item 0.9% sodium chloride solution revealed a mean opacity value of 0.491±0.310and a mean permeability value of 0.021 ± 0.012. The calculated IVIS value of0.806±0.491was well below the cut-off value of 3 (UN GHS no category).
The corneas treated with the positive control item 20% Imidazole in 0.9% NaCl solution revealed a mean opacity value of68.898±5.730and a mean permeability value of 1.909 ± 0.059 compared to the solvent control. The calculated IVIS value of97.538±5.300was within two standard deviations of the current historical mean and well above the cut-off value of 55. Hence, the acceptance criteria for the test were fulfilled.
Following treatment withDirhodium trioxide,amean opacity of1.674±1.243and a mean permeability value of 0.009 ± 0.005 compared to the negative control were determined. The calculated IVIS of1.814±1.314isbelow the cut-off value of 3 (UN GHS no category)andconsequently the test item is not classified as a severe irritant and is not corrosive according to UN GHS classification.Furthermore, it can be concluded that the test item Dirhodium trioxiderequiresnoclassification for eye irritation or serious eye damage under the UN GHS classification system.
The IVIS values are given in the table below:
|
Cornea No. |
Opacity |
Permeability |
IVIS |
||
Per Cornea |
Per Group |
|||||
Mean |
SD |
|||||
0.9% NaCl |
1 |
0.239 |
0.010 |
0.389 |
0.806 |
0.491 |
2 |
0.837 |
0.034 |
1.347 |
|||
3 |
0.398 |
0.019 |
0.683 |
|||
20% Dirhodium trioxide |
4 |
0.306 |
0.004 |
0.366 |
1.814 |
1.314 |
5 |
2.736 |
0.013 |
2.931 |
|||
6 |
1.979 |
0.011 |
2.144 |
|||
20% Imidazol |
7 |
62.418 |
1.957 |
91.773 |
97.538 |
5.300 |
8 |
73.294 |
1.927 |
102.199 |
|||
9 |
70.983 |
1.844 |
98.643 |
SD: standard deviation
OD: optical density
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- Dirhodium trioxide tested in the in vitro BCOP test method, had an IVIS value of 1.814, which is below the cut-off value of 3 (UN GHS no category) and consequently the test item is not classified as a severe irritant and is not corrosive according to UN GHS classification. It can be concluded that the test item Dirhodium trioxide requires no classification for eye irritation or serious eye damage under the UN GHS classification system.
- Executive summary:
The eye irritation potential of Dirhodium trioxide was determined in an in vitro system (Bovine Corneal Opacity and Permeability Assay (BCOP) test method) accodring to OECD test guideline 437. The solid test item was suspended in a 0.9% sodium chloride solution with a final concentration of 20% Dirhodium trioxide. 0.9% NaCl solution was used as the solvent control and 20% Imidazole in 0.9% NaCl solution as the positive control item.
The test item and the controls were applied to the epithelial surface of the cornea by addition to the anterior chamber of the corneal holder. The exposure time for the test item and the controls was 240 minutes. The optical density (OD) was measured at a wavelength of 490 nm.
The acceptance criteria of validity were fulfilled in this test.
Following treatment with Dirhodium trioxide a mean opacity of 1.674±1.243 and a mean permeability value of 0.009 ± 0.005 compared to the negative control were determined. The calculated IVIS of1.814±1.314 is below the cut-off value of 3 (UN GHS no category) and consequently the test item is not classified as a severe irritant and is not corrosive according to UN GHS classification.It can be concluded that the test item Dirhodium trioxide requires no classification for eye irritation or serious eye damage under the UN GHS classification system.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.