Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 231-545-4 | CAS number: 7631-86-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Article service life
Documentsopen allclose all
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 0: Other: Adhesives, sealants
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other:
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Service life of articles used by consumers
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Name of activity / technique:
- Service life of articles used by consumers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 8: Paper articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Use of paper articles
- Article category (AC):
- AC 8: Paper articles
Contributing activity / technique for workers
- Name of activity / technique:
- Use of paper articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Service life articles containing the substance in the form of coatings and in construction materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Article used by:
- workers
- Article category (AC):
- AC 7: Metal articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 1: Vehicles
- Article category (AC):
- AC 13: Plastic articles
- Article category (AC):
- AC13d: Plastic articles: Articles intended for food contact
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 8: Paper articles
- AC 11: Wood articles
- AC11e: Wood articles: Furniture & furnishings
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Article service life of various articles used by workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 7: Metal articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized_Set 2
- Reference substance:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 2
- Shape category:
- spheroidal
- Shape:
- other: spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 7 - <= 47 nm
- Percentile:
- D50
- Range:
- >= 9 - <= 63 nm
- Percentile:
- D90
- Range:
- >= 13 - <= 100 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 99.9 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 40 - <= 523 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- silane derivatization
- Order:
- #1
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Order:
- #2
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- External layer:
- hydrophilic
- Description:
- The silica nanoparticles are silane derivatized by covalent bonding (a condensation reaction) of the hydrolysed organosilanes to the silanols on the surface of the particles. This is done at high temperature (50-90C) and at high pH (9-11), making all the glycidoxypropyl silanes open up to diols (the functionality introduced on the surface of the Levasil CC products). For the Levasil CC 141, CC301 and CC401 products, the glycidoxypropyl silane is the only silane. For the Levasil CC503, a 50/50 molar ratio of glycidoxypropyl and propyl silane is used. No purification of the products is made.
- Percentage of coverage of particle surface, %:
- >= 55 - <= 90
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
- Name of activity / technique:
- Ceramics
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 8: Paper articles
- AC 11: Wood articles
- AC11e: Wood articles: Furniture & furnishings
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC 0: Other: AC 9: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 7: Metal articles
- Article category (AC):
- AC 8: Paper articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Synthetic amorphous silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Synthetic amorphous silicon dioxide
- Range of length:
- >= 25 - <= 30 nm
- Range of lateral dimension 1:
- >= 25 - <= 30 nm
- Range of lateral dimension 2:
- >= 25 - <= 30 nm
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Widespread use (indoor, outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- see ACs
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Name of activity / technique:
- Low energy manipulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released) Catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Related composition:
- Seahostar
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- Article category (AC):
- AC 01: Other (non intended to be released): catalyst
- Substance intended to be released from article:
- no
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 8: Paper articles
- AC 10: Rubber articles
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles; films, printed photographs; contractual articles and building material; wall construction material, ceramic, metal, plastic and wood material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 8: Paper articles
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
Contributing activity / technique for consumers
- Article category (AC):
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumersopen allclose all
- Name of activity / technique:
- Use of batteries
- Article category (AC):
- AC 3: Electrical batteries and accumulators
- Name of activity / technique:
- Use of electronic and electric articles
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Other: Photographic and reprographic articles: films, printed photographs;
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4f: Stone, plaster, cement, glass and ceramic articles: Articles with intense direct dermal contact during normal use
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7d: Metal articles: Articles intended for food contact
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11d: Wood articles: Articles intended for food contact
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 7: Metal articles
- Article category (AC):
- AC 8: Paper articles
- Article category (AC):
- AC 11: Wood articles
- Article category (AC):
- AC 13: Plastic articles
- Article category (AC):
- AC 01: Other (non intended to be released): Painted articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Ceramics
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Name of activity / technique:
- Ceramics
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Name of activity / technique:
- Ceramics
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Name of activity / technique:
- Ceramics
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 6: Leather articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 6: Leather articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 8: Paper articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- Article category (AC):
- AC 6: Leather articles
- Article category (AC):
- AC 8: Paper articles
- Article category (AC):
- AC 11: Wood articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 0: Other: Toner Cartridges
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 0: Other: Toner Cartridges
Contributing activity / technique for workers
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Related composition:
- Seahostar
- Reference substance:
- Silicon dioxide
- Article used by:
- consumers
- Substance intended to be released from article:
- no
- Name of activity / technique:
- Hygiene and sanitary products
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Name of activity / technique:
- Hygiene and sanitary products
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanomaterial, silanized
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silicon dioxide (SAS), nanostructured material, silanized
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- 100 - 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- In general, SAS contains no detectable amounts of crystalline silica. X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below.
- Range of specific surface area:
- >= 10 - <= 1 000 m²/g
- Range of volume specific surface area:
- >= 6.8 - <= 2 250 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Article used by:
- workers
- Substance intended to be released from article:
- no
- Name of activity / technique:
- test
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 0: Other: Optical products
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Widespread use (indoor, outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC 11: Wood articles
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 8: Paper articles
- AC 11: Wood articles
- AC11e: Wood articles: Furniture & furnishings
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC5c: Fabrics, textiles and apparel: Packaging (excluding food packaging)
- AC5f: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use
- Related assessment:
- use not assessed
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 7: Metal articles
- AC 8: Paper articles
- AC 11: Wood articles
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Regulatory status:
- use in food contact materials
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC13d: Plastic articles: Articles intended for food contact
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Service life of articles used by workers
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Name of activity / technique:
- Service life of articles used by workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in food contact materials
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in food contact materials
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Name of activity / technique:
- low energy manipulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Ceramics
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Name of activity / technique:
- Ceramics
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Name of activity / technique:
- Ceramics
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Name of activity / technique:
- Ceramics
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Ceramics
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Service life
- Article used by:
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC 13: Plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 7: Metal articles
- Article category (AC):
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Silicon dioxide
- Type of information reported:
- single nanoform
- Name of nanoform:
- Speroidal
- Shape category:
- spheroidal
- Remarks:
- ND and Z1, primary particle shape: 100% spherical particles with regular shape.
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Remarks:
- ND and Z1
- Percentile:
- D10
- Typical value:
- >= 1.2 nm
- Range:
- >= 0.5 - <= 10 nm
- Percentile:
- D50
- Typical value:
- >= 2.9 nm
- Range:
- >= 2 - <= 14 nm
- Percentile:
- D90
- Typical value:
- >= 11 nm
- Range:
- >= 5 - <= 40 nm
- Additional information:
- According to the TEM image and histogram, ND type Quartzene material’s particle dize varies between 1 to 20 nm where as the majority of the particles are below 10 nm in size.
As it can be seen from the TEM analysis, Z1 type Quartzene material’s particle size varies between 5 to 20 nm in the image and it should be mentioned that the analytical sample is an example of the Z1 particles on the TEM grid, different parts of the same gird may have different particles and the particle size can vary between 10 to 30 nm in size. - Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Typical composition:
- >= 99.7 %
- Range:
- >= 99.7 - <= 100 %
- Crystal system:
- not applicable
- Description:
- Z1 and ND is 100% amorphous (< 0,3 % crystalline parts). X-ray diffraction diagrams of ND/Z1 show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below. please see XRD-analysis for confirmation.
- Typical specific surface area:
- >= 279 m²/g
- Range of specific surface area:
- >= 122 - <= 556 m²/g
- Surface treatment applied:
- no
- Name:
- Silicon dioxide, silanized
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- Silicon dioxide
- Reference substance:
- Silicon dioxide, silanized
- Type of information reported:
- single nanoform
- Name of nanoform:
- Speroidal
- Shape category:
- spheroidal
- Remarks:
- Z1 Primary particle shape: 100% spherical particles with regular shape
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Remarks:
- Z1
- Percentile:
- D10
- Typical value:
- ca. 7.1 nm
- Range:
- >= 5 - <= 10 nm
- Percentile:
- D50
- Typical value:
- ca. 10.8 nm
- Range:
- >= 8 - <= 14 nm
- Percentile:
- D90
- Typical value:
- ca. 23 nm
- Range:
- >= 12 - <= 40 nm
- Additional information:
- According to the TEM image and histogram, ND type Quartzene material’s particle dize varies between 1 to 20 nm where as the majority of the particles are below 10 nm in size.
As it can be seen from the TEM analysis, Z1 type Quartzene material’s particle size varies between 5 to 20 nm in the image and it should be mentioned that the analytical sample is an example of the Z1 particles on the TEM grid, different parts of the same gird may have different particles and the particle size can vary between 10 to 30 nm in size. - Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Typical composition:
- >= 99.7 %
- Range:
- >= 99.7 - <= 100 %
- Description:
- Z1 and ND is 100% amorphous (< 0,3 % crystalline parts). X-ray diffraction diagrams of ND/Z1 show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below. please see XRD-analysis for confirmation.
- Typical specific surface area:
- >= 390 m²/g
- Range of specific surface area:
- >= 122 - <= 556 m²/g
- Surface treatment applied:
- yes
- Surface treatment name:
- Hydrophobization of silica whit Hexamethyldisilazane
- Order:
- #1
- Surface treatment agent:
- Silicon dioxide, silanized
- External layer:
- hydrophobic
- Description:
- Hydrophobization of silica whit Hexamethyldisilazane
- Percentage of coverage of particle surface, %:
- >= 30 - <= 100
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7d: Metal articles: Articles intended for food contact
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8d: Paper articles: Articles intended for food contact
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11d: Wood articles: Articles intended for food contact
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
- Name of activity / technique:
- see ERCs
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12c: Use of articles at industrial sites with low release
- Name of activity / technique:
- see ACs
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7d: Metal articles: Articles intended for food contact
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11d: Wood articles: Articles intended for food contact
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- Name of activity / technique:
- se PROC
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4f: Stone, plaster, cement, glass and ceramic articles: Articles with intense direct dermal contact during normal use
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7d: Metal articles: Articles intended for food contact
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11d: Wood articles: Articles intended for food contact
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- waste
- Pattern of exposure:
- accidental / infrequent
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 7: Metal articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 7: Metal articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in food contact materials
- Article used by:
- workers
- consumers
- Article category (AC):
- AC13d: Plastic articles: Articles intended for food contact
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use not assessed
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- Article category (AC):
- AC1b: Other vehicles
- Article category (AC):
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- Article category (AC):
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC 3: Electrical batteries and accumulators
- Article category (AC):
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- Article category (AC):
- AC13c: Plastic articles: Packaging (excluding food packaging)
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: Adhesives, sealants
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: not intended to be released, catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Metal oxyde catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in an own CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC8g: Other paper articles
- AC10g: Other rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Other articles
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC8g: Other paper articles
- AC10g: Other rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Name:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized_Set 2
- Reference substance:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 2
- Shape category:
- spheroidal
- Shape:
- other: spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 7 - <= 47 nm
- Percentile:
- D50
- Range:
- >= 9 - <= 63 nm
- Percentile:
- D90
- Range:
- >= 13 - <= 100 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 99.9 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 40 - <= 523 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- silane derivatization
- Order:
- #1
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Order:
- #2
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- External layer:
- hydrophilic
- Description:
- The silica nanoparticles are silane derivatized by covalent bonding (a condensation reaction) of the hydrolysed organosilanes to the silanols on the surface of the particles. This is done at high temperature (50-90C) and at high pH (9-11), making all the glycidoxypropyl silanes open up to diols (the functionality introduced on the surface of the Levasil CC products). For the Levasil CC 141, CC301 and CC401 products, the glycidoxypropyl silane is the only silane. For the Levasil CC503, a 50/50 molar ratio of glycidoxypropyl and propyl silane is used. No purification of the products is made.
- Percentage of coverage of particle surface, %:
- >= 55 - <= 90
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs, Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC8g: Other paper articles
- AC10g: Other rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC8g: Other paper articles
- AC10g: Other rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Service life
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silica gel
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Silica gel
- Article used by:
- consumers
- Substance intended to be released from article:
- no
- Name of activity / technique:
- Hygiene and sanitary products
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Name of activity / technique:
- Hygiene and sanitary products
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 5: Fabrics, textiles and apparel
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC13d: Plastic articles: Articles intended for food contact
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- synthetic amorphous silica, nanostructured material
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanomaterial
- Reference substance:
- synthetic amorphous silica, nanostructured material
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silicon dioxide (SAS), nanostructured material
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- 100 - 100 %
- Structure:
- amorphous
- Name:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The limit of quantifcation is 0.3 % corresponding to a limit of detection of 0.1 % quartz. The maximum quartz content is less than 0.1%.
- Range of specific surface area:
- >= 10 - <= 1 000 m²/g
- Range of volume specific surface area:
- >= 6.8 - <= 2 250 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- no
- Name:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanomaterial, silanized
- Reference substance:
- synthetic amorphous silicon dioxide, nanostructured material, silanized
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- synthetic amorphous silicon dioxide (SAS), nanostructured material, silanized
- Shape category:
- spheroidal
- Shape:
- other: 3-dimensional branched fractal aggregates
- Pure shape:
- yes
- Range:
- >= 99 - <= 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D50
- Range:
- >= 1 - <= 100 nm
- Percentile:
- D90
- Range:
- >= 1 - <= 100 nm
- Additional information:
- The particle forming mechanism for each manufacturing process starts with the formation of liquid nuclei that grow to constituent particles that coagulate to aggregates and solidify. Constituent particles are therefore spherical in nature while aggregates (and agglomerates) show a high fractal structure.
- Fraction of constituent particles in the size range 1-100 nm:
- 100 - 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range:
- > 99.7 - <= 100 %
- Description:
- In general, SAS contains no detectable amounts of crystalline silica. X-ray diffraction diagrams of SAS, show only a broad halo, revealing an X-ray amorphous structure. The detection limit for crystallinity by X-ray is in the maximum order of 0.3% by weight or below.
- Range of specific surface area:
- >= 10 - <= 1 000 m²/g
- Range of volume specific surface area:
- >= 6.8 - <= 2 250 m²/cm³
- Skeletal density:
- >= 1.7 - <= 2.25 g/cm³
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Article used by:
- workers
- Substance intended to be released from article:
- no
- Name of activity / technique:
- test
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- CAS-Name: Silica, amorphous, fumed, crystalline-free [CAS-No. 112945-52-5]
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- CAS-Name: Silica, amorphous, fumed, crystalline-free [CAS-No. 112945-52-5]
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 5: Fabrics, textiles and apparel
- AC5c: Fabrics, textiles and apparel: Packaging (excluding food packaging)
- AC6g: Other leather articles
- AC13d: Plastic articles: Articles intended for food contact
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC11a: Wood articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 10: Rubber articles
- AC 0: Other: Tyres
- Substance intended to be released from article:
- no
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumersopen allclose all
- Name of activity / technique:
- Use of tyres
- Article category (AC):
- AC 0: Other: Tyres
- Name of activity / technique:
- Use of rubber articles and articles having rubber parts
- Article category (AC):
- AC 10: Rubber articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4d: Stone, plaster, cement, glass and ceramic articles: Articles intended for food contact
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4f: Stone, plaster, cement, glass and ceramic articles: Articles with intense direct dermal contact during normal use
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 5: Fabrics, textiles and apparel
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC5b: Fabrics, textiles and apparel: Toys intended for children's use (and child dedicated articles)
- AC5c: Fabrics, textiles and apparel: Packaging (excluding food packaging)
- AC5d: Fabrics, textiles and apparel: Articles intended for food contact
- AC5e: Fabrics, textiles and apparel: Furniture & furnishings, including furniture coverings
- AC5f: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use
- AC5g: Fabrics, textiles and apparel: Articles with intense direct dermal contact during normal use: bedding and mattresses
- AC5h: Other articles made of fabrics, textiles and apparel
- AC 6: Leather articles
- AC6a: Leather articles: Large surface area articles
- AC6b: Leather articles: Toys intended for children's use (and child dedicated articles)
- AC6c: Leather articles: Packaging (excluding food packaging)
- AC6d: Leather articles: Articles intended for food contact
- AC6e: Leather articles: Furniture & furnishings, including furniture coverings
- AC6f: Leather articles: Articles with intense direct dermal contact during normal use
- AC6g: Other leather articles
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7d: Metal articles: Articles intended for food contact
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8d: Paper articles: Articles intended for food contact
- AC8e: Paper articles: Furniture & furnishings
- AC8f1: Paper articles: Articles with intense direct dermal contact during normal use: personal hygiene articles
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 10: Rubber articles
- AC10a: Rubber articles: Large surface area articles
- AC10b: Rubber articles: Toys intended for children's use (and child dedicated articles)
- AC10c: Rubber articles: Packaging (excluding food packaging)
- AC10d: Rubber articles: Articles intended for food contact
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC10f: Rubber articles: Articles with intense direct dermal contact during normal use
- AC10g: Other rubber articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11d: Wood articles: Articles intended for food contact
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 19: Hand-mixing with intimate contact and only PPE available.
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 02: Other (intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Metal Oxide Catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Metal Oxide Catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- Article category (AC):
- AC 7: Metal articles
- Substance intended to be released from article:
- no
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Service life
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8d: Paper articles: Articles intended for food contact
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
Service life
- Article used by:
- workers
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 0: Other: Painted articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- Article category (AC):
- AC 6: Leather articles
- Article category (AC):
- AC 7: Metal articles
- Article category (AC):
- AC 11: Wood articles
- Article category (AC):
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 8: Paper articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 0: Other: Optical products
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumersopen allclose all
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- Article category (AC):
- AC 0: Other: Optical products
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of articles with low release
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Name of activity / technique:
- use of plastic and rubber articles by consumers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 8: Paper articles
- AC 10: Rubber articles
- AC 11: Wood articles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Name of activity / technique:
- processing, assembly and use of plastic and rubber articles by workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silica, nanostructured material_Set 1
- Reference substance:
- Amorphous Silicon Dioxide
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 1
- Shape category:
- spheroidal
- Shape:
- other: Spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 5 - <= 51 nm
- Percentile:
- D50
- Range:
- >= 7 - <= 69 nm
- Percentile:
- D90
- Range:
- >= 12 - <= 103 nm
- Fraction of constituent particles in the size range 1-100 nm:
- > 95 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 79 - <= 906 m²/g
- Surface treatment applied:
- no
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 8: Paper articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC 8: Paper articles
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC 3: Electrical batteries and accumulators
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC 5: Fabrics, textiles and apparel
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC 10: Rubber articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC 11: Wood articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13d: Plastic articles: Articles intended for food contact
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC 0: Other: Photographic and reprographic articles: films, printed photographs; AC 12-1 Constructional articles and building material; wall construction material, ceramic, metal, plastic and wood construction material, insulating material
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- see ERCs
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Name of activity / technique:
- see ACs
- Article category (AC):
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC5a: Fabrics, textiles and apparel: Large surface area articles
- AC7a: Metal articles: Large surface area articles
- AC7e: Metal articles: Furniture & furnishings
- AC10a: Rubber articles: Large surface area articles
- AC10e: Rubber articles: Furniture & furnishings, including furniture coverings
- AC13a: Plastic articles: Large surface area articles
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
Contributing activity / technique for workers
- Name of activity / technique:
- see PROCs
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 0: Other: handling of electronic materials
- Related assessment:
- use assessed in a joint CSR
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC8a: Paper articles: Large surface area articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Related composition:
- synthetic amorphous silicon dioxide, nanostructured material, silanized_Set 2
- Reference substance:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Type of information reported:
- set of nanoforms
- Name of set of nanoforms:
- Synthetic amorphous silicon dioxide - Set 2
- Shape category:
- spheroidal
- Shape:
- other: spheroidal
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Range:
- >= 7 - <= 47 nm
- Percentile:
- D50
- Range:
- >= 9 - <= 63 nm
- Percentile:
- D90
- Range:
- >= 13 - <= 100 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 99.9 - <= 100 %
- Structure:
- amorphous
- Pure structure:
- yes
- Range of specific surface area:
- >= 40 - <= 523 m²/g
- Surface treatment applied:
- yes
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Surface treatment name:
- silane derivatization
- Order:
- #1
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- Order:
- #2
- Surface treatment agent:
- Amorphous Silicon Dioxide - organic treatment (silanized)
- External layer:
- hydrophilic
- Description:
- The silica nanoparticles are silane derivatized by covalent bonding (a condensation reaction) of the hydrolysed organosilanes to the silanols on the surface of the particles. This is done at high temperature (50-90C) and at high pH (9-11), making all the glycidoxypropyl silanes open up to diols (the functionality introduced on the surface of the Levasil CC products). For the Levasil CC 141, CC301 and CC401 products, the glycidoxypropyl silane is the only silane. For the Levasil CC503, a 50/50 molar ratio of glycidoxypropyl and propyl silane is used. No purification of the products is made.
- Percentage of coverage of particle surface, %:
- >= 55 - <= 90
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 11: Wood articles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 5: Fabrics, textiles and apparel
- AC 6: Leather articles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 13: Plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- consumers
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Washing and cleaning products
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Name of activity / technique:
- Washing and cleaning products
- Article category (AC):
- AC 5: Fabrics, textiles and apparel
- Related assessment:
- use not assessed
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC4a: Stone, plaster, cement, glass and ceramic articles: Large surface area articles
- AC4b: Stone, plaster, cement, glass and ceramic articles: Toys intended for children's use (and child dedicated articles)
- AC4c: Stone, plaster, cement, glass and ceramic articles: Packaging (excluding food packaging)
- AC4e: Stone, plaster, cement, glass and ceramic articles: Furniture & furnishings
- AC4g: Other articles made of stone, plaster, cement, glass or ceramic
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- AC 8: Paper articles
- AC8a: Paper articles: Large surface area articles
- AC8b: Paper articles: Toys intended for children's use (and child dedicated articles)
- AC8c: Paper articles: Packaging (excluding food packaging)
- AC8e: Paper articles: Furniture & furnishings
- AC8f2: Paper articles: Articles with intense direct dermal contact during normal use: printed articles with dermal contact in normal conditions of use
- AC8g: Other paper articles
- AC 11: Wood articles
- AC11a: Wood articles: Large surface area articles
- AC11b: Wood articles: Toys intended for children's use (and child dedicated articles)
- AC11c: Wood articles: Packaging (excluding food packaging)
- AC11e: Wood articles: Furniture & furnishings
- AC11f: Wood articles: Articles with intense direct dermal contact during normal use
- AC11g: Other wood articles
- AC 13: Plastic articles
- AC13a: Plastic articles: Large surface area articles
- AC13b: Plastic articles: Toys intended for children's use (and child dedicated articles)
- AC13c: Plastic articles: Packaging (excluding food packaging)
- AC13e: Plastic articles: Furniture & furnishings, including furniture coverings
- AC13f: Plastic articles: Articles with intense direct dermal contact during normal use
- AC13g: Other plastic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Related assessment:
- use assessed in a joint CSR
Service life
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 7: Metal articles
- AC 11: Wood articles
- AC 01: Other (non intended to be released): Painted articles
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11b: Widespread use of articles with high or intended release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Service life
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: Adhesives, sealants
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC 13: Plastic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
- ERC12b: Processing of articles at industrial sites with high release
- ERC12c: Use of articles at industrial sites with low release
Contributing activity / technique for consumers
- Article category (AC):
- AC 13: Plastic articles
- AC13d: Plastic articles: Articles intended for food contact
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Name of activity / technique:
- Metal oxide catalyst
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Name of activity / technique:
- Metal oxide catalyst
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Related assessment:
- use assessed in a joint CSR
Service life
- Article used by:
- workers
- Article category (AC):
- AC10g: Other rubber articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: use of seals, o-rings, inner liners
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- waste
- Pattern of exposure:
- accidental / infrequent
Service life
- Article used by:
- consumers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 4: Stone, plaster, cement, glass and ceramic articles
- AC 7: Metal articles
- AC 13: Plastic articles
Service life
- Article used by:
- workers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- Article category (AC):
- AC 0: Other: (non intended to be released): catalyst
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- ERC12a: Processing of articles at industrial sites with low release
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
- Article category (AC):
- AC 1: Vehicles
- AC1a: Vehicles covered by End of Life Vehicles (ELV) directive
- AC1b: Other vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC2a: Machinery, mechanical appliances, electrical/electronic articles covered by the Waste Electrical and Electronic Equipment (WEEE) directive
- AC2b: Other machinery, mechanical appliances, electrical/electronic articles
- AC 3: Electrical batteries and accumulators
- AC 7: Metal articles
- AC7a: Metal articles: Large surface area articles
- AC7b: Metal articles: Toys intended for children's use (and child dedicated articles)
- AC7c: Metal articles: Packaging (excluding food packaging)
- AC7e: Metal articles: Furniture & furnishings
- AC7f: Metal articles: Articles with intense direct dermal contact during normal use
- AC7g: Other metal articles
Reference
Contributing activity / technique for the environment
Contributing activity / technique for consumers
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Article used by:
- workers
- consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
- Substance intended to be released from article:
- no
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- ERC11a: Widespread use of articles with low release (indoor)
Contributing activity / technique for consumers
- Article category (AC):
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- AC 4: Stone, plaster, cement, glass and ceramic articles
Service life
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silicon dioxide
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Silicon dioxide
- Article used by:
- workers
- Article category (AC):
- AC 1: Vehicles
- AC 2: Machinery, mechanical appliances, electrical/electronic articles
- Substance intended to be released from article:
- no
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Process category (PROC):
- PROC 0: Other: handling of electronic materials
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.