Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 209-400-1 | CAS number: 576-26-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Genetic toxicity: in vitro
Administrative data
- Endpoint:
- in vitro gene mutation study in mammalian cells
- Remarks:
- Type of genotoxicity: gene mutation
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: According to OECD Guideline 476 (adopted 4 April 1984).
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 1 994
- Report date:
- 1994
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 476 (In Vitro Mammalian Cell Gene Mutation Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- 1) The OECD Principles of Good Laboratory Practice, 1981; and 2) Chemicals Act of the Federal Republic of Germany (Annex 1), 14 March 1990.
- Type of assay:
- mammalian cell gene mutation assay
Test material
- Reference substance name:
- 2,6 xylenol
- IUPAC Name:
- 2,6 xylenol
- Reference substance name:
- 2,6-xylenol
- EC Number:
- 209-400-1
- EC Name:
- 2,6-xylenol
- Cas Number:
- 576-26-1
- Molecular formula:
- C8H10O
- IUPAC Name:
- 2,6-dimethylphenol
- Details on test material:
- - Name of test material (as cited in study report): 2,6-xylenol; 2,6-dimethylphenol
- Physical state: Colourless solid
- Analytical purity: 99.8 + %
- Purity test date: No data
- Stability under test conditions: No data
- Storage condition of test material: Was stored at 4 degrees C
Constituent 1
Constituent 2
Method
- Target gene:
- Hypoxanthine-guanine phosphoribosyl transferase (HPRT)
Species / strain
- Species / strain / cell type:
- Chinese hamster lung fibroblasts (V79)
- Details on mammalian cell type (if applicable):
- - Properly maintained: yes
- Periodically checked for Mycoplasma contamination: yes
- Periodically checked for karyotype stability: yes
- Metabolic activation:
- with and without
- Metabolic activation system:
- Aroclor 1254-induced rat liver S9 microsomal fraction
- Test concentrations with justification for top dose:
- Experiment I: Without S9 mix: 10.0, 30.0, 100.0, 300.0 µg/mL; With S9 mix: 30.0, 200.0, 300.0, 450.0 µg/mL
Experiment II: Without S9 mix: 30.0, 300.0, 350.0, 400.0 µg/mL; With S9 mix: 30.0, 100.0, 200.0, 300.0, 600.0 µg/mL
- Vehicle / solvent:
- - Vehicle(s)/solvent(s) used: ethanol
- Justification for choice of solvent/vehicle: The solvent was chosen according to its solubility properties and its non-toxicity for the cells. The final concentration of ethanol in the culture medium did not exceed 1% v/v.
Controlsopen allclose all
- Untreated negative controls:
- yes
- Negative solvent / vehicle controls:
- yes
- Remarks:
- ethanol
- Positive controls:
- yes
- Positive control substance:
- ethylmethanesulphonate
- Remarks:
- >98% purity; 0.6 mg/mL (4.8 mM); dissolved in nutrient medium
Migrated to IUCLID6: without metabolic activation
- Positive controls:
- yes
- Positive control substance:
- 7,12-dimethylbenzanthracene
- Remarks:
- approx. 95% purity; 3.85 ug/mL (15 uM); dissolved in DMSO
Migrated to IUCLID6: with metabolic activation
- Details on test system and experimental conditions:
- PRE-TEST ON TOXICITY: A pre-test was performed to determine the concentration range for the mutagenicity experiments. The general culturing and experimental conditions in the pre-test were the same as those described below for the mutagenicity experiments. In this pre-test, the colony forming ability of approximately 500 single cells (duplicate cultures per concentration) after treatment with 2,6-xylenol was observed and compared to the controls. Toxicity of 2,6-xylenol was evidenced by a reduction in cloning efficiency. In the pre-test for toxicity (colony forming ability) the cloning efficiency of the V79 cells was reduced after treatment with 10.0 ug/mL -S9 mix and with 300.0 ug/mL +S9 mix.
DOSE SELECTION: Experiment I was performed with six concentrations ranging from 3.0 ug/mL -S9 mix and 30.0 ug/mL +S9 mix both up to 600.00 ug/mL. Experiment II was performed with six concentrations ranging from 30.0 ug/mL up to 400 ug/mL -S9 mix and up to 600.0 ug/mL +S9 mix. During the course of the main experiments, four concentrations (five in Experiment II +S9 mix) were selected to be evaluated at the end of the experiment.
MUTAGENICITY EXPERIMENTS
SELECTION AGENT: 6-thioguanine
SEEDING: The cell suspension was seeded into plastic culture flasks. Approximately 1.5 x 10^6 (single culture) and 5 x 10^2 cells (in duplicate) were seeded in MEM with 10% FCS (complete medium) for the determination of mutation rate and toxicity, respectively.
TREATMENT: After 24 h the medium was replaced with serum-free medium containing the test article, either without S9 mix or with 50 uL/mL S9 mix. After 4 h this medium was replaced with complete medium following two washing steps with saline G.
INCUBATION: Cultures were incubated at 37 degrees C in a humidified atmosphere with 4.5% CO2.
FIXATION AND STAINING: Cloning efficiency flasks in the main experiments were processed for fixation and staining on Day 16, while mutant selection flasks were processed for fixation and staining on Day 17. Fixation and staining for the Pre-test on Toxicity flasks occurred on either Day 8 or Day 9. The colonies were stained with 10% methylene blue in 0.01% KOH solution. The stained colonies with more than 50 cells were counted. - Evaluation criteria:
- A test article was classified as positive if it induced either a concentration-related increase of the mutant frequency or a reproducible and positive response for one of the test points. A test article producing neither a concentration-related increase in the mutant frequency nor a reproducible positive response at any of the test points was considered non-mutagenic in this system. A significant response was described as follows: The test article was classified as mutagenic if it induced reproducibly with one of the concentrations a mutation frequency that was three times higher than the spontaneous mutation frequency in the experiment. The test article was classified as mutagenic if there was a reproducible concentration-related increase of the mutation frequency. Such evaluation was also considered in the case that a three-fold increase of the mutant frequency was not observed. However, in a case by case evaluation this decision depended on the level of the corresponding negative control data. If there was by chance a low spontaneous mutation rate in the range normally found (0 - 45 mutants per 10^6 cells), a concentration-related increase of the mutations within this range was discussed.
- Statistics:
- Not performed.
Results and discussion
Test results
- Species / strain:
- Chinese hamster lung fibroblasts (V79)
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- cytotoxicity
- Vehicle controls validity:
- other: Absolute cloning efficiency was low for the+S9 vehicle control in Exp. II only. However, this did not affect the validity of the study.
- Untreated negative controls validity:
- other: Absolute cloning efficiencies were low for both the -S9 and +S9 neg. controls in Exp. II only. However, this did not affect the validity of the study.
- Positive controls validity:
- valid
- Additional information on results:
- RANGE-FINDING/SCREENING STUDIES: A pre-test on toxicity was performed. The cloning efficiency of the V79 cells was reduced after treatment with 10.0 ug/mL -S9 mix and with 300.0 ug/mL +S9 mix. These results were used to select concentrations for the main mutagenicity experiments.
COMPARISON WITH HISTORICAL CONTROL DATA: Performed.
Any other information on results incl. tables
In Experiment I a concentration-dependent toxic effect evidenced by a reduction in cloning efficiency (CE% relative) was observed in the -S9 cultures beginning at 100.0 ug/mL up to the highest investigated concentration. Also, the cell density at the first subcultivation (-S9 mix) was reduced at 300.0 ug/mL. In the +S9 cultures, toxicity evidenced by a reduction in the cloning efficiency as well as in the cell density at first subcultivation was obtained with 450.0 ug/mL. At the highest concentration (600.0 ug/mL) both with and without metabolic activation, the cultures could not be subcultured for mutant selection due to the high toxicity of 2,6 -xylenol.
In Expermiment II the toxicity of 2,6 -xylenol was less distinctive. In the -S9 cultures, 2,6 -xylenol showed toxic effects beginning at the concentration of 300.0 ug/mL in the cloning efficiency; the cell density at the first subcultivation was slightly reduced at 400.0 ug/mL (highest concentration tested). In the +S9 cultures strong toxic effects in the cloning efficiency as well as in the cell density at first subcultivation were observed at 600.0 ug/mL (the highest concentration). However, this concentration was subcultivated for the selection of mutants; cell density at first subcultivation was 19.2%, which compared to the corresponding solvent control, but was slightly under the recommended 20% limit.
The mutation rates found in the groups treated with 2,6 -xylenol were comparable to those found in the negative and solvent controls; thus, no relevant increase of gene mutations was observed. 2,6 -xylenol did not induce a reproducible concentration-related increase in mutant colony numbers. The mutant values of the groups treated with 2.6 -xylenol were in the range of the negative controls.
The slightly increased value of 36.1 mutants per 10^6 cells in Experiment I at 450 ug/mL +S9, which resulted in a mutation factor of 2.95 was regarded not to be biologically relevant. This effect could not be reproduced in the independent experiment. Additionallyy, the value of 36.1 mutants per 10^6 cells was within the laboratory's historical control range (0 - 45 mutants per 10^6).
In this study in both experiments (-S9 and +S9) the range of the negative controls was from 4.5 up to 18.4 mutants per 10^6 cells; the range of the groups treated with 2.6 -xylenol was from 0.7 up to 36.1 mutants per 10^6 cells.
Applicant's summary and conclusion
- Conclusions:
- Interpretation of results (migrated information):
negative
As the mutation rates found in the groups treated with 2,6-xylenol were comparable to the negative and solvent controls, it was concluded that no relevant increase of gene mutations was observed. In conclusion,under the experimental conditions reported, 2,6-xylenol did not induce gene mutations at the HPRT locus in V79 cells. Therefore, 2.6-xylenol was considered non-mutagenic in this HPRT assay.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)