Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-480-0 | CAS number: -
Density
Administrative data
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Well documented study performed according to EU acceptable method
Cross-reference
- Reason / purpose for cross-reference:
- reference to same study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 010
- Report date:
- 2010
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- GLP compliance:
- no
- Remarks:
- other quality assurance
- Type of method:
- pycnometer method
Test material
- Reference substance name:
- Iron silicate, copper smelting and refining
- EC Number:
- 701-480-0
- Cas Number:
- 67711-92-6
- IUPAC Name:
- Iron silicate, copper smelting and refining
- Details on test material:
- The following sample types were choosen as representative for the production processes depending on origin of raw material (primary or secondary) and slag cooling rate ( :rapd coolig /granulation or slow cooling)
Type I: Slag, Granules, Primary
Type II: Slag, Granules, Secondary
Type III: Slag, Slow cooled, primary
Type IV: Slag, slow cooled, secondary
12 samples representative or the slag types described above were colleced at different sites
Sampling and sample preparation was performed according to ECI/REACH C1 Sampling Protocol. The C1 sampling protocol also provides detailed information on the identity of the samples (see IUCLID section 1.4).
Constituent 1
Results and discussion
Density
- Type:
- relative density
- Density:
- 3.04 - 4.12 g/cm³
- Temp.:
- 20 °C
Any other information on results incl. tables
Sample |
Slag |
Slag |
Slag |
Slag |
|
|
|
|
Slag |
Slag |
Slag |
Slag |
Slag |
Slag |
Slag |
Slag |
Sample type |
Type I |
Type I |
Type I |
Type I |
|
|
|
|
Type II |
Type II |
Type II |
Type II |
Type III |
Type III |
Type III |
Type IV |
Outotec code |
09TT02641 |
09TT02988 |
09TT03512 |
09TT05246 |
|
|
|
|
09TT02986 |
09TT02987 |
09TT03177 |
09TT03821 |
09TT03989 |
09TT05245 |
09TT03503 |
09TT03181 |
Density, g/cm3 |
3.31 |
3.80 |
3.04 |
3.74 |
|
|
|
|
3.89 |
3.91 |
3.77 |
3.80 |
4.07 |
3.73 |
4.12 |
4.12 |
Applicant's summary and conclusion
- Conclusions:
- Density in the range of 3.04 to 4.12 g/cm3 was measured.
- Executive summary:
Density in the range of 3.04 to 4.12 g/cm3 was measured.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
