Registration Dossier

Administrative data

First-aid measures

General advice
Seek medical advice. If breathing has stopped or is labored, give assisted respirations. Supplemental oxygen may be indicated. If the heart has stopped, trained personnel should begin cardiopulmonary resuscitation immediately.
Eye contact
Hold eyelids apart, initiate and maintain gentle and continuous irrigation until the patient receives medical care. If medical care is not promptly available, continue to irrigate for one hour.
Skin contact
Immediately remove contaminated clothing, and any extraneous chemical, if possible to do so without delay. Initiate and maintain continuous irrigation until the patient receives medical care. If medical care is not promptly available, continue to irrigate for one hour. Cover wound with sterile dressing. Take off contaminated clothing and shoes immediately. NOTE TO PHYSICIANS: Application of corticosteroid cream has been effective in treating skin irritation.
Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Prevent aspiration of vomit. Turn victim's head to the side.
Move to fresh air.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Alcohol-resistant foam. Carbon dioxide (CO2). Dry chemical. Dry sand. Limestone powder.
Extinguishing media which must not be used for safety reasons.
No data available.
Special hazards arising from the substance or mixture
May generate ammonia gas. May generate toxic nitrogen oxide gases. Incomplete combustion may form carbon monoxide. Downwind personnel must be evacuated. Burning produces noxious and toxic fumes.
Advice for fire-fighters
Avoid contact with the skin. A face shield should be worn. Use personal protective equipment. Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Do not allow run-off from fire fighting to enter drains or water courses., Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use self-contained breathing apparatus and chemically protective clothing. Wear suitable protective clothing, gloves and eye/face protection. Evacuate personnel to safe areas.
Environmental precautions
Construct a dike to prevent spreading.
Methods and material for containment and cleaning up
Approach suspected leak areas with caution. Contact Air Products' Emergency Response Center for advice. Place in appropriate chemical waste container.
Additional advice
If possible, stop flow of product.

Handling and storage

Precautions for safe handling
Avoid contact with eyes. Avoid contact with skin and eyes. Emergency showers and eye wash stations should be readily accessible. Adhere to work practice rules established by government regulations. Use personal protective equipment. When using, do not eat, drink or smoke.
Conditions for safe storage, including any incompatibilities
Store in steel containers preferably located outdoors, above ground, and surrounded by dikes to contain spills or leaks. Do not store near acids. Keep containers tightly closed in a dry, cool and well-ventilated place.
Technical measures/Precautions
Do not store in reactive metal containers.

Transport information

Land transport (ADR/RID)

UN number:
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S., (N-[2-[2-(dimethylamino) ethoxy] ethyl]-N-methyl-1,3-propanediamine)
Chemical name:
(N-[2-[2-(dimethylamino) ethoxy] ethyl]-N-methyl-1,3-propanediamine)
Packaging group:
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
If applicable, refer to the extended section of the SDS for further information on CSA.
Exposure controls
Engineering measures
Provide readily accessible eye wash stations and safety showers.
Provide natural or explosion-proof ventilation adequate to ensure concentrations are kept below exposure limits.
Personal protective equipment
Hand protection
Neoprene gloves.
Nitrile rubber.
Impervious gloves.
The breakthrough time of the selected glove(s) must be greater than the intended use period.
Eye protection
Full face shield with goggles underneath.
Skin and body protection
Impervious clothing.
Full rubber suit (rain gear).
Rubber or plastic boots.
Special instructions for protection and hygiene
Discard contaminated leather articles. Wash at the end of each workshift and before eating, smoking or using the toilet. Provide readily accessible eye wash stations and safety showers.

Stability and reactivity

Refer to possibility of hazardous reactions and/or incompatible materials sections
Chemical Stability
Stable under normal conditions.
Conditions to avoid
No data available.
Incompatible materials
Sodium hypochlorite.
Organic acids (i.e. acetic acid, citric acid etc.).
Mineral acids.
Product slowly corrodes copper, aluminum, zinc and galvanized surfaces.
Reaction with peroxides may result in violent decomposition of peroxide possibly creating an explosion.
Oxidizing agents.
Hazardous decomposition products
Nitric acid.
Nitrogen oxides (NOx).
Nitrogen oxide can react with water vapors to form corrosive nitric acid.
Carbon monoxide.
Carbon dioxide (CO2).

Disposal considerations

Waste treatment methods
Contact supplier if guidance is required.
Contaminated packaging
Dispose of container and unused contents in accordance with federal, state, and local requirements.