Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- none
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.12 (Flammability (Contact with Water))
- Version / remarks:
- None
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.13 (Pyrophoric Properties of Solids and Liquids)
- Version / remarks:
- None
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- In conclusion, FP-100 is not ‘highly flammable’ according to the criteria of the guideline.
Reference
Highly flammable: N
Pyrophoric substance (A13): N
Highly flammable solid (A10): N
In contact with water substance liberates highly flammable gases (A12): N
Description of key information
In conclusion, FP-100 is not ‘highly flammable’ according to the criteria of the guideline.
Key value for chemical safety assessment
- Flammability:
- non flammable
Additional information
FLAMMABILITY: In contact with the ignition source, FP-100 first emitted some sparks and then melted. FP-100 could not be ignited with a flame during the preliminary test (contact time of about 2 minutes). Therefore, no main test was performed. In conclusion, FP-100 is not ‘highly flammable” according to the criteria of the guideline.
FLAMMABILITY IN CONTACT WITH WATER AND PYROPHORIC PROPERTIES:
Chemical Structure: The appraisal of the molecular structure indicates no risk with respect to pyrophoric properties or the potential of evolving flammable gases in contact with water or humid air.
Practical Experience: Studies were performed in aqueous test systems (e.g. water solubility). The test item did not show any spontaneous ignition or formation of flammable gases performing the above- mentioned study. Thus, it can be concluded beyond reasonable doubt that the test item does not ignite spontaneously when in contact with water or humid air. |
Justification for classification or non-classification
The study showed that FP-100 is non-flammable under all of the test conditions as discussed above
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
