Registration Dossier

Administrative data

First-aid measures

Description of first aid
In case of eye contact: Wash eyes with plenty of water for at least 15 minutes, occasionally raising the upper and lower eyelids.
Ask medical help immediately.
In case of inhalation: Ask for medical help immediately. Remove from exposure and move to fresh air immediately.
If not breathing, do artificial respiration. If the breath is difficult, provide oxygen. Get medical help
In case of skin contact: Wash skin with plenty of water for at least 15 minutes while removing contaminated clothes and shoes.
If the victim is conscious and alert, give 2-4 Fuls milk cup or water.
In case of ingestion: Do not give anything by mouth to an unconscious person. Ask for medical help immediately.

Symptoms and effects, acute and delayed
Potential heather symptoms and effects
Eye: Redness May cause mild eye irritation.
Skin: May cause mild skin irritation. It is not expected to cause and the allergic reaction on the skin.
Ingestion: It can cause irritation of the digestive tract.
Inhalation: May cause respiratory tract irritation.
Chronic: No information found
Immediate and special medical attention
treatment: Consult a doctor. Symptomatic and supportive treatment.

Fire-fighting measures

Extinguishing media Water fog, foam, CO2, dry powder
Suitable extinguishing media: Do not use straight water currents
Suitable extinguishing media:
Special exposure hazards, products of combustion: Thermal decomposition can produce monoxide carbon, carbon dioxide, nitrogen oxides and chloride hydrogen.
Special protection equipment for firefighters: Wear appropriate protective equipment and clothing.
Protection against fire and explosion: None.

Accidental release measures

Personal precautions: Avoid making dust; avoid contact with skin and eyes with the
Use of an approved dust mask.
As a general precaution: Wash thoroughly after contact with the product.
Environmental measures: Does not require special measures, comply with regulations local.
Cleaning methods: Vacuum clean powders with equipment equipped with HEPA filter or
Extended absorbent material, collect in a container
appropriate for its elimination. For large spills, dike
with inert material. Collect spilled material for your
possible recovery or elimination. Resort All large spills
to the environmental authorities. Wash contaminated surface
with water and detergent. Waste disposal methods
must be in accordance with the methods established by the
local, state and federal authorities.

Handling and storage

Precautions for safe handling: All handling can cause the emission of dust.
Organize the handling in such a way that the creation of dust reduce to a minimum. Secondary dust emission can be minimized through good maintenance.
Conditions of safe storage: Interior and dry, shop in accordance with procedures approved storage.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limit control parameters: Unproven values
Technical measures / Precautions: Limit of exposure (s) must be controlled using equipment
adequate analytics

Individual measures of protection
Protective equipment
respiratory: Wear disposable respiratory masks, suitable for powders
annoying
Protection of the skin and eyes: Wear gloves and overalls use glasses or safety glasses with
lateral protection.
General protection equipment: Cleaning of contaminated clothing by suction; Do not
brush or use compressed air.

Stability and reactivity

Chemical stability: Stable under recommended storage conditions.
Possibility of dangerous reactions: Risk of dust.
Conditions to avoid: Avoid humidity.
No condition that should be avoided. Avoid all sources of ignition: heat, sparks and open flames. Avoid humidity. Avoid electrostatic charging.
Substances to be avoided: No known substance that should be avoided.
Hazardous decomposition products: It can produce carbon monoxide, carbon dioxide,
nitrogen oxides and hydrogen chloride

Disposal considerations

Product: Observe all federal, state and local regulations. Contact a waste disposal service licensed professional to discard this material.
Contaminated packaging: Discard as unused product.
Methods for waste treatment: The residue of this material is not considered as waste dangerous according to the EU-rules and can generally carry to a normal tip with a permit to handle the waste industrial When contaminated with dangerous products the advice from an expert has to be obtained. In general the product is dusty, and as long as it has not properly moistened, it must be packed in containers well closed for disposal. Check the regulations and local requirements.