Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

After inhalation: Supply fresh air and to be sure call for a doctor.
After skin contact: If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing: Seek immediate medical advice.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing agents: CO2, sand, extinguishing powder. Do not use water. Use fire extinguishing methods suitable to surrounding conditions.
For safety reasons unsuitable extinguishing agents: Water with full jet.
Protective equipment: Do not inhale explosion gases or combustion gases.
Additional information: Cool endangered receptacles with water spray.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Keep away from ignition sources.
Environmental precautions: Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up: Dispose contaminated material as waste according to item 13.

Handling and storage

Handling:

Precautions for safe handling: Store in cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace.
Information about fire and explosion protection: Keep ignition sources away. Do not smoke. Protect against electrostatic charges.

Conditions for safe storage, including any incompatibilities:
Storage:

Requirements to be met by storerooms and receptacles: Store in a cool location. Prevent any seepage into the ground.
Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight. Store receptacle in a well ventilated area.

Transport information

Land transport (ADR/RID)

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (FERULA GALBANIFLUA EXTR.)
Class:
3 (F1) Flammable liquids.
Packaging group:
III
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (FERULA GALBANIFLUA EXTR.)
Class:
3 (F1) Flammable liquids.
Packaging group:
III
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (FERULA GALBANIFLUA EXTR.)
Class:
3 (F1) Flammable liquids.
Packaging group:
III
EmS code:
F-E,S-E
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1993
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (FERULA GALBANIFLUA EXTR.)
Class:
3 (F1) Flammable liquids.
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Ingredients with limit values that require monitoring at the workplace: Not required.

Exposure controls:

Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Avoid contact with the skin.
Respiratory protection: Use suitable respiratory protective device in case of insufficient ventilation.
Protection of hands: Protective gloves: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Safety glasses

Stability and reactivity

Chemical stability:
Thermal decomposition / conditions to be avoided: Not determined.

Reactivity:
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Hazardous decomposition products: Not determined.

Disposal considerations

Waste treatment methods:
Recommendation: Must be specially treated adhering to official regulations.

Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.