Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice:


- Move out of dangerous area.


- Consult a physician.


- Show this safety data sheet to the doctor in attendance.


- Do not leave the victim unattended.


 


If inhaled:


- Move to fresh air.


- If unconscious, place in recovery position and seek medical advice.


- If symptoms persist, call a physician.


 


In case of skin contact:


- Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.


- If on skin, rinse well with water.


- If on clothes, remove clothes.


 


In case of eye contact:


- Small amounts splashed into eyes can cause irreversible tissue damage and blindness.


- In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 


- Continue rinsing eyes during transport to hospital.


- Remove contact lenses.


- Protect unharmed eye.


- Keep eye wide open while rinsing.


- If eye irritation persists, consult a specialist.


 


If swallowed:


- Keep respiratory tract clear.


- Do NOT induce vomiting.


- Do not give milk or alcoholic beverages.


- Never give anything by mouth to an unconscious person.


- If symptoms persist, call a physician.


- Take victim immediately to hospital.


 


Most important symptoms and effects, both acute and delayed


- Risks: Harmful if swallowed. Causes serious eye damage. Causes severe burns.


 


Indication of any immediate medical attention and special treatment needed


- Treatment: The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.

Fire-fighting measures

Suitable extinguishing media:


- Use extinguishing measures that are appropriate to local  circumstances and the surrounding environment.


 


Unsuitable extinguishing media:


- High volume water jet


 


Special hazards arising from the substance or mixture


- Specific hazards during firefighting: Do not allow run-off from fire fighting to enter drains or water courses.


- Hazardous combustion products: Nitrogen oxides (NOx)


 


Advice for firefighters


- Special protective equipment for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.


- Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
- Use personal protective equipment.
- Avoid dust formation.
- Avoid breathing dust.


 


Environmental precautions:
- Prevent product from entering drains.
- Prevent further leakage or spillage if safe to do so.


 


Methods and material for containment and cleaning up:
- Keep in suitable, closed containers for disposal.

Handling and storage

Precautions for safe handling


Advice on safe handling:
- Avoid formation of respirable particles.
- Do not breathe vapours/dust.
- Avoid contact with skin and eyes.
- Smoking, eating and drinking should be prohibited in the application area.
- Dispose of rinse water in accordance with local and national regulations.


Advice on protection against fire and explosion:
- Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.


Hygiene measures:
- When using do not eat or drink. When using do not smoke.
- Wash hands before breaks and at the end of workday.


Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
- Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Electrical installations / working materials must comply with the technological safety standards.


Further information on storage conditions:
- See label, package insert or internal guidelines


Storage class (TRGS 510):
- 8A, Combustible, corrosive hazardous materials


Further information on storage stability:
- No decomposition if stored and applied as directed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Chemical name:
1-Decanaminium, N-decyl-N,N-dimethyl-, hexanedioate (2:1)
Language:
English
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
9
Special provisions / remarks
Special provisions:
Classification Code: M7
Tunnel restriction code: (-)
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Chemical name:
1-Decanaminium, N-decyl-N,N-dimethyl-, hexanedioate (2:1)
Language:
English
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
EmS code:
F-A
S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
Environmentally hazardous substance, solid, n.o.s.
Chemical name:
1-Decanaminium, N-decyl-N,N-dimethyl-, hexanedioate (2:1)
Language:
English
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
IATA (Cargo)
Packing instruction (cargo aircraft): 956
Packing instruction (LQ) : Y956
Labels: Miscellaneous

IATA (Passenger)
Packing instruction (passenger aircraft): 956
Packing instruction (LQ): Y956
Labels: Miscellaneous
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Eye protection:
- Eye wash bottle with pure water
- Tightly fitting safety goggles
- Wear face-shield and protective suit for abnormal processing problems.


Hand protection:
In case of full contact:
- Material : Nitrile rubber
- Break through time : > 480 min
- Glove thickness : 0,11 mm


In case of contact through splashing:
- Material : Nitrile rubber
- Break through time : > 480 min
- Glove thickness : 0,11 mm


- Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.


Skin and body protection:
- Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stability and reactivity

Reactivity
- Stable under normal conditions.


Possibility of hazardous reactions
- No data available
- No decomposition if stored and applied as directed.


Conditions to avoid
- No data available


Incompatible materials:
- Materials to avoid: No data available


Hazardous decomposition products
- In case of fire hazardous decomposition products may be produced such as: Nitrogen oxides (NOx)

Disposal considerations

Waste treatment methods
Product:
- The product should not be allowed to enter drains, water courses or the soil.
- Do not contaminate ponds, waterways or ditches with chemical or used container.
- Send to a licensed waste management company.


Contaminated packaging:
- Empty remaining contents.
- Dispose of as unused product.
- Empty containers should be taken to an approved waste handling site for recycling or disposal.
- Do not re-use empty containers.