Registration Dossier

Administrative data

First-aid measures

If inhaled:
If breathed in, move person into fresh air.
Victim to lie down in the recovery position, cover and keep him warm.
Artificial respiration and/or oxygen may be necessary.
Consult a physician.

In case of skin contact:
Remove all contaminated clothing under the shower.
Keep warm and in a quiet place.
Wash off immediately with plenty of water.
Call a physician immediately.
Wash contaminated clothing before re-use.

In case of of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses.
Consult a physician.

If swallowed:
If swallowed, rinse mouth with water (only if the person is conscious).
Drink plenty of water.
Do NOT induce vomiting.
Take victim immediately to hospital.

Fire-fighting measures

Suitable extinguishing media:
water mist, dry powder, foam, carbon dioxide CO2, sand.

Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.

Accidental release measures

Personal precautions:
Evacuate personnel to safe areas.
Prevent further leakage or spillage if safe to do so.
Avoid breathing dust.
Keep away from open flames, hot surfaces and sources of ignition.

Methods for cleaning up:
Sweep up and shovel into suitable containers for disposal.
Pick up and arrange disposal without creating dust.
Keep in suitable, closed containers for disposal.
Dispose of in accordance with local regulations.

Environmental precautions:
Should not be released into the environment.
Do not flush into surface water or sanitary sewer system.

Handling and storage

Advice on safe handling:
Ensure all equipment is electronically grounded before beginning transfer operations.
To avoid thermal decomposition, do not overheat.
Keep away from heat and sources of ignition.
Avoid formation of dust and aerosols.

Advice on protection against fire and explosion:
Avoid dust formation.
Keep away from heat and sources of ignition.

Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.

Storage temperature: 15 - 30 °C.

Transport information

Land transport (ADR/RID)

UN number:
1759
Shippingopen allclose all
Class:
8
Classification code:
C10
Packaging group:
III
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
1759
Shippingopen allclose all
Class:
8
Classification code:
C10
Packaging group:
III
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
1759
Proper shipping name and description:
CORROSIVE SOLID, N.O.S. (3-(2-chloroethyl)-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one monohydrochloride)
Chemical name:
(3-(2-chloroethyl)-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one monohydrochloride)
Class:
8
Packaging group:
III
EmS code:
F-A, S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
1759
Proper shipping name and description:
CORROSIVE SOLID, N.O.S. (3-(2-chloroethyl)-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one monohydrochloride)
Chemical name:
(3-(2-chloroethyl)-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one monohydrochloride)
Packaging group:
III
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection:
Engineering controls should always be the primary method of controlling exposures.
If respiratory protective equiment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazard, physical and warning properties of substances present.
Respirator with a full face mask.
P3.

Hand protection:
Nitrile rubber
Long sleeve gloves

Skin and body protection:
chemical suit with hood.

Hygiene measures:
Handle in accordance with good industrial hygiene safety practice.

Protective measures:
The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Stability and reactivity

Reactivity:
None reasonably foreseeable.

Chemical stability:
Stable under normal conditions.

Possibiltiy of hazardous reacation:
Risk of dust explosion.

Conditions to avoid:
To avoid thermal decomposition, do not overheat.
Heat, flames and sparks.

Disposal considerations

Do not allow uncontrolled discharge of product into the environment.