Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Emergency measure - Inhalation: Symptomatic treatment. Seek immediate medical attention if
irritation occurs.
Emergency measure - Eyes: Rinse eyes thoroughly for at least 15 minutes with water. If
irritation occurs seek medical attention.
Emergency measure - Skin: Rinse affected area thoroughly for at least 15 minutes. If
irritaton occurs seek medical attention. Launder clothing
before re-use.
Emergency measure - Ingestion: Symptomatic treatment. Do not induce vomiting. Seek
immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide or dry foam may be used.

Product arising from burning: Products of combustion may contain oxides of carbon.

Product determined by test: N

Protective equipment: Full protective clothing and a self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear suitable protective equipment such as a dust mask to a
minimum standard of EN149FFP2S, chemical protective gloves
to a standard prEN374, eye protection capable of giving
chemical protection as classified in prEN166 and skin
protection as classified by standard EN368.

Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original containers.

Clean the spillage area with water and detergent. Avoid
directing the washings to the drain.

Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by skin and
eye contact and by inhalation.

Engineering controls are necessary to reduce exposure to the

When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard prEN166

When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP2S.

The standards mentioned above should be regarded as a

Storage: Store in a dry well-ventilated area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: Plastic or metal drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: Avoid crushing the containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:
Hygiene measures:
Wash hands before breaks and after work.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection:
Breathing apparatus in the event of aerosol or dust formation.

Hand protection:
Use impermeable, CE-approved gloves for the manipulation of chemical products.
Observe the information of the glove manufactures on permeability and breakthough times and other workplpace requirements.

Eye protection:
safety glasses/ face shiels.

Body protection:
working clothes

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: There is a potential dust explosion hazard for this organic

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for reuse is not economically or technically

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon oxides)
could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: The substance does not enter the public domain.